⭐️£850 S13 ex comp car project over fenders, body kit, solid shell project!!⭐️ ****PRICE DROP WILL TAKE £850 **** For updated pics follow eBay link Nissan 200sx s13 s14 drift skid track car | eBay Ok guaging interest on a 13 shell I haven't had very long. I was 100% going to finish the project however as always things come up and I've been offered a s14 real cheap. So testing the water seeing if any one fancies this. Firstly apologise about the photos!! This is what happens when I'm away with work and you ask your mrs to take some shots Ok so to start: It's a ex drift cup 2014 car it's pretty straight and a very solid shell, it's had a fair amount of welding done at some point but all the sills, boot floor, fuel tank straps etc look good. 1 piece of welding that will need doing is there's a 1 penny size whole in the chassis leg. Apart from that the cars real clean and solid! Inner arches as tried to show in pics have been rubbed back and painted along with all the sills etc for added protection. The shell already has bolt in roll cage mounts, and hydro handbrake lines are all run just literally need to bolt the hydro on. What it comes with: 50mm rear over fenders riveted on 30mm d max style front wings Unknown side skirts Rust free bonnet 5 stud conversion Drilled and grooved s14 rear brakes Polybushed subframe Drive shafts 180sx rear windows S13 rear lights Walbro fuel pump At present the car comes with NO ENGINE or gearbox or ecu It has half an SR20DET loom in it as this is what the car was running. Pricing up parts and a good shell I don't think I'm asking too much money, so if you feel I am then feel free to move on to the next post without any "hero" comments lol. Come and have a look see what you think I can remove parts to negotiate a deal if required. Located in bordon, Hampshire £850
Yep and as you advised only worth 200, plus mine was a real kit not a copy or "style" and had a rear bumper! Yes it was probably advertised for too much but only going of what someone reckoned it was worth and wasnt overly fussed on selling it as I'd still have to get another front and rear bumper You wanted 2k for this with no engine/gearbox/loom/ecu/seat and welding needed on the chassis lol Hardly a comp spec car is it?
FI I sold my S13 bare shell which was very similar, needed 2 bits of welding, with glass/doors and tailgate for 350. Should be plenty of buyers around that price. You'd probably be best breaking it mate.
Really? Blimey when I was looking I just couldn't find one! Appreciate your input tho bud actually helpful. Think I'll go ahead and break it then, I've seen shells on eBay for like £1k so thought that's what decent ones sold for lol. Cheers tho think I'll break or finish it