Xlarge 200sx s13 - 89 Kensei (Sweden)

Thread in 'Project Cars and Builds Threads' started by Xlarge__, Mar 21, 2010.

  1. Xlarge__

    Xlarge__ Member

    Joined:
    Jan 22, 2010
    Posts:
    31
    Likes Received:
    0
    Xlarge 200sx s13 - Ghetto drifter

    My last post errored out, so I have to start the whole thread all over..
    Btw sorry for the bad english !

    2007-2009
    Bought this stock s13 for about 3years ago, decided to spend as little money on the exterior as possible so i bought a used JMS kit and garage painted the body porshe red with black roof, then found these gay ass lexus light wich i tinted red and spray painted the middlegarnish black for a "wannabe kouki look"

    Now when the exterior is kinda' nice I'll go for the fun part, talked with realcar and got a great deal on FMIC kit, shortshift from autobhan88 and some sparco stuff to get my skidding as cosy as possible :euge:

    Then hooked with japtuning wich set me up with most of the stage 2 engine parts.

    2010 - ?
    Decided to ride for japtuning this season to so ordered some more stuff to jump on stage 3.

    Also got a great deal on traction parts from a distributor in the US, unfortunally some parts were made for s14.

    (So if anyone needs s14 strutbars just gimme a holla !)


    Car specification:

    Engine & tranny
    Autobahn88 shortshift
    Auobahn88 FMIC kit
    HKS SSQV v2 BOV
    Apexi power intake filter
    XS-power manifold
    XS-power exhaust system
    Walbro fuelpump
    6 pucked ACT clutch
    Oilcooler (16 rows)
    T28RS running 1.2bar
    H-dev stage 3 chip
    Double exhaustcams
    444cc fuel injectors
    z32 afm
    Linear SARD BTR
    WeaponR overflow tank
    Double 12" SPAL fans
    Revotec fancontroller
    Allstar performance breathtank
    Apexi AFC neo
    Bee*R powerbuilder

    Chassie & suspension
    Japspeed strutbars
    Billstein heavy duty shocks with JAMEX lowering springs.
    Energy performance polyurethane bushings
    Solid subframe bushes from APEX
    Black Advanti sienna 18" rims (Falkens ATM 215/35-zr18)
    Rays Volk leightweight lugnuts
    A bunch of spacers
    Welded diff


    Before:
    [​IMG]

    [​IMG]

    [​IMG]


    After:
    [​IMG]

    [​IMG]

    Thanks to my sponsor:
    Japtuning


    Not really a project thread guy, but I'll try to keep up !

    Cheers ! :smash:
     
    #1 Xlarge__, Mar 21, 2010
    Last edited: Mar 14, 2011
  2. sasha

    sasha Member

    Joined:
    Jan 23, 2010
    Posts:
    106
    Likes Received:
    0
    nice,good luck with the project:thumbs:
     
  3. Xlarge__

    Xlarge__ Member

    Joined:
    Jan 22, 2010
    Posts:
    31
    Likes Received:
    0
    Say goodbye to 2010's looks, sold the bodykit and bought some origin overfenders and a vertex bodykit. Just waiting for the fecking snow to melt so I can move the car to the garage and start the fitting of the aeros and refurb the chassie before I give the engine a massage.

    More pics will come as I get my fingers outta my ass and start doing something :euge:
    [​IMG]
     
  4. Xlarge__

    Xlarge__ Member

    Joined:
    Jan 22, 2010
    Posts:
    31
    Likes Received:
    0
    Some old pictures:

    Interior early 2010
    [​IMG]


    Some 19" wheels i bought from an old lady for about £70, refurbed and sold for £400 :thumbs: Drove half through sweden to get them.
    [​IMG]

    [​IMG]

    "I don't care, hellaflush"
    [​IMG]

    Interior today
    [​IMG]
     
    #4 Xlarge__, Mar 14, 2011
    Last edited: Mar 15, 2011
  5. Xlarge__

    Xlarge__ Member

    Joined:
    Jan 22, 2010
    Posts:
    31
    Likes Received:
    0
  6. Magic21

    Magic21 Active Member

    Joined:
    Jun 29, 2009
    Posts:
    1,077
    Likes Received:
    1
    Nice build mate. Would they be magic aero rear fenders ;)
     
  7. Xlarge__

    Xlarge__ Member

    Joined:
    Jan 22, 2010
    Posts:
    31
    Likes Received:
    0
    Thnx !
    Haha, you know it dude ! ;)

    Probably the only thing that fitted right on, those genuine origin front fenders are soo crooked that the left one wont even fit the car. Gonna try put som wights on it over the night to flatten it out.

    And the rear fender need heating to realese some tension on the left side.
     
    #7 Xlarge__, Apr 3, 2011
    Last edited: Apr 3, 2011
  8. Sifeizai

    Sifeizai Member

    Joined:
    Jul 21, 2009
    Posts:
    180
    Likes Received:
    0
    love the clean interior m8....
     
  9. Xlarge__

    Xlarge__ Member

    Joined:
    Jan 22, 2010
    Posts:
    31
    Likes Received:
    0
    Got the rollcage from Initial_J for about a week ago.
    Rattle painted it green too match up with the takatas.

    Also cleaned the car from asphalt mats and stuff, after that i spraypainted the floor gunmetal grey.

    [​IMG]

    [​IMG]


    Tomorrow I'll install the coilovers and test drive it for the first time in 10 months ! :wack:


    One more thing, do someone have any experience of the fatlace webshop ?
    Ordered from them in feb. and haven't got the stuff yet.
     
    #9 Xlarge__, Apr 21, 2011
    Last edited: Apr 21, 2011
  10. Xlarge__

    Xlarge__ Member

    Joined:
    Jan 22, 2010
    Posts:
    31
    Likes Received:
    0
    Drove up to the car to give it a check, since I was there I changed the rocker covers and painted one of my grey wheels black since i broke one of the black last season. Also stripped the bodykit from the car to ease tomorrows job with the rear fenders.

    Realized that i need to give tha enginebay a refurb and some paint...


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    #10 Xlarge__, May 12, 2011
    Last edited: May 12, 2011
  11. Drift_Kidd

    Drift_Kidd Member

    Joined:
    Jul 20, 2010
    Posts:
    340
    Likes Received:
    0
    How did you get your bonnet to go up at that angel ?
    Nice project thread here mate, and some nice progress, keep it up :thumbs:
     
  12. Xlarge__

    Xlarge__ Member

    Joined:
    Jan 22, 2010
    Posts:
    31
    Likes Received:
    0
    just bent the hinges a bit, theres a locking sprint on both sides that prevents the bonnet to go over a sertain angle.

    Just bend them so the sprints runs free.
    Sorry for the bad explanation, my english isn't the what it should be :euge:
     
  13. Xlarge__

    Xlarge__ Member

    Joined:
    Jan 22, 2010
    Posts:
    31
    Likes Received:
    0
    Cut out the rear fenders today and pounded the arches because the car was resting on the wheels

    Now it's a little more clearance , I possibly weld it tomorrow :thumbs:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    When the welding is done I'll remove the glue from my old bodykit, and prepare the arch for some paint.
     
  14. Dennis-SX

    Dennis-SX Member

    Joined:
    May 3, 2010
    Posts:
    41
    Likes Received:
    0
    what tail lights are those? can you tel mee?
     
  15. chopaholic

    chopaholic Well-Known Member

    Joined:
    Jan 23, 2009
    Posts:
    1,724
    Likes Received:
    39
    They look like Lexus style ones with red tint spray...

    Car looks really good mate!
     
  16. Xlarge__

    Xlarge__ Member

    Joined:
    Jan 22, 2010
    Posts:
    31
    Likes Received:
    0
    Thats true, chrome lexus lights tinted red.

    The bodykit are currently being painted, doing it in a garage so just praying to get a decent result.

    Pics will get up tomorrow !
     
  17. Xlarge__

    Xlarge__ Member

    Joined:
    Jan 22, 2010
    Posts:
    31
    Likes Received:
    0
  18. Xlarge__

    Xlarge__ Member

    Joined:
    Jan 22, 2010
    Posts:
    31
    Likes Received:
    0
    Just need to figure out a new color to the wheels.

    Thinking of bronze atm.
     
  19. fejjan

    fejjan Member

    Joined:
    Sep 3, 2007
    Posts:
    249
    Likes Received:
    0
    Looking good! :)
     
  20. kam

    kam I've touched Chris Parry

    Joined:
    Apr 10, 2006
    Posts:
    7,566
    Likes Received:
    1
    Looks sweet!
     

Share This Page