Got new Coilpacks.. LS2 Coils, these have built in amplifier.. Also ideal to Remote Mount, hence the leads I'll be fitting these this weekend, then off to be mapped again.. Should make 500+hp with the ignition system sorted..
Yeah man, they are good CoilPacks, means 2 of my team mates and I all use the same coils so we carry common spares. Iv altered my wiring loom for these now, my friend Craig has made an Alu plate to mount the coils, he also made a bracket, just need to weld it up.. We've also just acquired a small lathe, so I'm going to turn up some nice little spacers for the coilpacks too..
hang on a minute, you removed the switch panel i lovingly made?!!? That Touring car kit looks the bollocks, every IS / Altezza should get one
Yeah..... Sorry man.. Your panel was good, but I made a bigger one that I could fit more onto.. And yeah dude, so excited to get the kit on.. Hurry up with it y0..
Fitting coilpacks today.. Probilly getting roughly mapped this week.. Need to get it up to Protuner really. I may have acquired some cams too...
Yeah it has become fully badass.. I don't want to sell it but needs must and all that.. And while Iv got it I need to get it to a reasonable state to sell it in. With the cams I'm hoping for close to 600hp Oh and the Touring Car Bodykit should be here in a few weeks.. Going to modify the front wings before that goes on too..lol
Fitted Genuine Factory Wind Deflectors.. Cut original Alcantara Door Cards down to fit round the Roll Cage..
Split my Kakimoto SSR's down for new paint.. Made some bracketry for the new coilpacks.. Iv fitted this now but the leads are to short.. Got a set of Magnecor KV85's coming Three of the coils are mounted the other side if you were wondering why only three..
Meow Bodykit will be a few weeks.. Then Iv got a week of modifying to do on the front wings before they get painted and fitted. The probilly gona need some mental wheel spacers...lol
Yea, I think they are 30mm wider than stock on each side Could put in a bit more effort and extend the lower and upper arms so you widen the track and then you have less of a chance hitting the arches on full lock.
All in good time... They are not the sort of thing you want to rush.. I may even make new lower arms from scratch, and modify another pair of hubs without the offset top.
