zenki 14 street car

Thread in 'Project Cars and Builds Threads' started by michealkirwan, Jun 7, 2015.

  1. michealkirwan

    michealkirwan Member

    Joined:
    Jun 6, 2015
    Posts:
    219
    Likes Received:
    2
  2. Squire

    Squire New Member

    Joined:
    Oct 20, 2009
    Posts:
    26
    Likes Received:
    0
    Pic's don't do this car justice atall but in person it's sweet as f*ck!!!
     
  3. michealkirwan

    michealkirwan Member

    Joined:
    Jun 6, 2015
    Posts:
    219
    Likes Received:
    2
    dealing with the disaster of a cut and spliced loom so replaced it and sorted all the pins and wired correctly now and she started!
    [​IMG]
    dave barett in kildorry sorted the wheels for me first the centre bore then took some of the back of the wheels to bring them in a bit
    [​IMG]
    before the skim
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    need 2 or 3 marks on one and sand and polish them up have 235 on the back must go 215
    sprayed inside the doors
    [​IMG]
    [​IMG] refitted dash
    tewiga wheel nuts then
    [​IMG][​IMG]
    sorted piping for afm and now change the manifold gasket as old one was perished and put it all back together
    relocate battery
    tracking
    swap rears for smaller
    wire fan on switch
    fit wheel arch liners
    tax it
    front bumper fit and get side indicators
    spray under the bonnet
     
    #63 michealkirwan, Jul 12, 2016
    Last edited: Jul 12, 2016
  4. michealkirwan

    michealkirwan Member

    Joined:
    Jun 6, 2015
    Posts:
    219
    Likes Received:
    2
  5. HaydenK

    HaydenK Member

    Joined:
    Jan 8, 2016
    Posts:
    48
    Likes Received:
    1
    Looks good man
     
  6. michealkirwan

    michealkirwan Member

    Joined:
    Jun 6, 2015
    Posts:
    219
    Likes Received:
    2
    so car is back home brought it from lennys to mine on the recovery as its still not starting.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    home
    [​IMG]
    the workhorse and the toy!
    [​IMG]
    [​IMG]
    stiv from mdt called out for two hours and gave it a go has it down to the pump or afm or wiring in between so brought it up to him the next day, should be done wednesday im just mad to drive it. fitted the indicators too they look great in it. stivs sorting some of the niggily bits too.[​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    need two smaller profile tyres on the back as the arches were sitting on the wheels the coilovers locking collers are fairly seized and the front needs adjusting too. i might go 215 instead of 235 that are on now make the back wheels look less out.
     
    #66 michealkirwan, Jul 25, 2016
    Last edited: Jul 25, 2016
  7. michealkirwan

    michealkirwan Member

    Joined:
    Jun 6, 2015
    Posts:
    219
    Likes Received:
    2
    jesus its been months since i got a chance to update. i swapped the vskfs to the rear as the images were way too wide and put the enkeis back on the front got car sorted for jae in newark in england, savage weekend will be heading back there. before i left that thursday the rad was fucked so i ordered a new japspeed one and silicone hoses and changed the coolant temp sensor as it was acting the prick.
    [​IMG]
    [​IMG]
    [​IMG]

    myself and nigel!
    [​IMG]
    [​IMG]
    we were the only irish crowd and the ones with the marquees that kept blowing over haha! i had the only sunroof zenki there and one of 2 zenki 14s at all. got a spin in a 34 skyline too was great craic!
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    people loved the car and the best show ever in my opinion the irish car scenes best day is literally a day and thats japfest. got over all the way and back 16 of us in 8 cars 4 the thursday 4 the friday ferry was ok some scraping going on the uras bumper beating everything.the colour was breaking necks everywhere which im happy about
    waiting for the ferry home![​IMG]
    learned a lot about the car from the drive still needs tidying up
    was a leak from the rocker gasket throwing oil onto yhr manifold and into the dash only when accelarating i changed the seal
    gearbox speedo seal ive now changed
    and heater matrix no heating i put in new hoses so still to check
    chaned the coilovers front and back out with the cuscos

    [​IMG]
    got apex basically mint for the front in the pic and bcs for the rear theyre 3 months old
    [​IMG]
    turbo lines swapped for braided ones
    [​IMG]
    cars up on axle stands at the moment again the bonnet i sold and getting this soon
    [​IMG]
    fitted a boost guage and the bumper in in shite the nidsection so going to get another and make a diffuser type splitter also got to fit new indicators again as one cover decided to fuck off and i need to nct it
     
    #67 michealkirwan, Nov 11, 2016
    Last edited: Nov 11, 2016
  8. michealkirwan

    michealkirwan Member

    Joined:
    Jun 6, 2015
    Posts:
    219
    Likes Received:
    2
    and random s body meet up with mark moriarty who has this s14 a
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  9. michealkirwan

    michealkirwan Member

    Joined:
    Jun 6, 2015
    Posts:
    219
    Likes Received:
    2
    Have the apex in the front and bcs in the rear now and refilled the gearbox
     
  10. michealkirwan

    michealkirwan Member

    Joined:
    Jun 6, 2015
    Posts:
    219
    Likes Received:
    2
    13568848_898068496993637_3211641340607049090_o
     
  11. michealkirwan

    michealkirwan Member

    Joined:
    Jun 6, 2015
    Posts:
    219
    Likes Received:
    2
    waiting on a lambda sensor to arrive a brand new genuine one before i try run the car as id rather it wasnt lumpy and fill up with oil. need wheels a zenki vented bonnet if possible and looking at a dmax type 3 bumper also looking for front antiroll bar bushes or brackets that fit normally. mine seem squashed.
     
  12. michealkirwan

    michealkirwan Member

    Joined:
    Jun 6, 2015
    Posts:
    219
    Likes Received:
    2
    said id update this a little
    Updated!
    Sr20det blacktop non vvt
    Forged pistons
    tomie inlet cam
    hks exhaust cam
    hks valve springs
    alloy sump
    ported
    cosworth valves and con rods
    apex front and bc rear coilovers
    apexi rsm
    adj tension rods
    vertex skirts
    origin streamline rear
    going for a dmax type 3 front bumper and dmax style bonnet
    wheels to be decided
    Front mount intercooler
    dished steering wheel
    3 inch cat back exhaust
    Stainless manifold
    s14 with braided lines turbo
    s15 brakes
    Engine damper
    uprated clutch
    cusco 2 way diff
    50mm over fenders
    chargespeed bootlid
    origin streamline rear bumper with vertex skirts
    wrapped and underside sealed.
     
    #72 michealkirwan, Dec 8, 2016
    Last edited: Dec 8, 2016
  13. Struggle

    Struggle Active Member

    Joined:
    Nov 25, 2008
    Posts:
    2,746
    Likes Received:
    0
    lower them both for god sake
     
  14. michealkirwan

    michealkirwan Member

    Joined:
    Jun 6, 2015
    Posts:
    219
    Likes Received:
    2
    lower what?
     
  15. Struggle

    Struggle Active Member

    Joined:
    Nov 25, 2008
    Posts:
    2,746
    Likes Received:
    0
    the cars!!! they on stilts.
     
  16. Rochey

    Rochey Member

    Joined:
    Oct 4, 2005
    Posts:
    634
    Likes Received:
    0
    Irish roads really don't lend themselves to having proper low cars, even in the citys they are appalling let alone rural areas where they are unbelievably bad.
     
  17. michealkirwan

    michealkirwan Member

    Joined:
    Jun 6, 2015
    Posts:
    219
    Likes Received:
    2
    its just not possible in ireland struggle. mine was so low at the front it was hitting cats eyes there was pieces of fibreglass flaying over my bonnet! the college i go to has loads of ramps and speedbumps and weve roads full of potholes. id love to have it on its arse trust me but our roads are shocking. bringing on the ferry over to jae i had the lowest car there and that was entertaining enough! the uras bumper is gone i fixed it a lot looked class on it but im after a dmax type 3 now. ive got a nismo precut vent and marking it out as we speak
     
  18. michealkirwan

    michealkirwan Member

    Joined:
    Jun 6, 2015
    Posts:
    219
    Likes Received:
    2
    update time!
    got a nismo z tune vent off ebay very impressed with quality.
    [​IMG]
    got a free bonnet off a friend and cut it to fit. strange going at a bonnet with a grinder. zenki bonnets are very curved but got in on and done its primered now need small bits of filler. ill sort that then its getting wrapped.
    [​IMG]
    bought 18s off adrian walsh theyre works. dishes on the rears are fecked like need sanding theyve a layer of chrome plating on them thats coming off. the rears fit but the front wont clear the calipers and i can try a spacer to clear but i dont want to cut my extended wheel studs, always something! front are 9s rears are 10s.
    [​IMG]
    [​IMG]

    might sell on we will see.
     
  19. michealkirwan

    michealkirwan Member

    Joined:
    Jun 6, 2015
    Posts:
    219
    Likes Received:
    2
    put fronts on got the 25 mm spacers off the back on the front now and wheels on awaiting 50mm rear ones. fucking couriers fucked up the delivery 3 days late so far. so with the 10s on the back we will see how they fit should be lalalalalalala enough for everyones approval haha. got the right 27mm front antiroll bar bushes, superpro polybush, in and perfect.
    just horn
    bumper
    battery relocated
    washer bottle
    sort turbo lines
    tape up some wires
    coolant
    front bumper
    bonnet back on then nct!
    for now!
     
  20. michealkirwan

    michealkirwan Member

    Joined:
    Jun 6, 2015
    Posts:
    219
    Likes Received:
    2
    got the spacers at long last and on the car.
    [​IMG]
    [​IMG]
    cleaned the backs of the wheels as they were rotton with dust etc they looked like this,
    [​IMG]
    so theyre done, fitted the guards inside the wings and dropped her
    [​IMG]
    [​IMG]
    [​IMG]
    try get more done tomorrow
     

Share This Page