24 hour drift car project

Thread in 'Project Cars and Builds Threads' started by themdngtgarage, May 25, 2017.

  1. themdngtgarage

    themdngtgarage New Member

    Joined:
    May 17, 2016
    Posts:
    10
    Likes Received:
    3
    So we turned a volvo 940 station into a drift car within 24 hours

    BGq0Lew.

    when we bought it:

    kegsx0.

    when we bought it



    We had a really cool idea and that is to turn it into a drift car within 24 hours and then drift it until one of us crashed it.

    However, it turned out that getting 7 guys together on one day to build the car was harder than expected. So literally half a year later we finally going to start!



    This weekend we are going to start. Unfortunatly we already spent almost the full budget on the car and some small stuff so we hardly have any cash left for the project. How could this possibly go wrong? Anyways Stay tuned as we are going to start on friday and we will stop on saturday. Ill be sure to post some progress on the car as we progress so stay tuned for that :)

    BTW it's a low boost 2.3 liter so if any volvo guys have some tips to do some zero budget stuff to it then feel free to post it haha
     
    #1 themdngtgarage, May 25, 2017
    Last edited: May 29, 2017
  2. BreadBin

    BreadBin Rough Tonguer

    Joined:
    Apr 28, 2005
    Posts:
    784
    Likes Received:
    16
    Space the actuator with washers for extra boost - keep adding until you hit fuel cut then remove one.
     
  3. Okoye

    Okoye Member

    Joined:
    Oct 12, 2014
    Posts:
    40
    Likes Received:
    0
    The wastegate arm should be adjustable.
     
  4. BreadBin

    BreadBin Rough Tonguer

    Joined:
    Apr 28, 2005
    Posts:
    784
    Likes Received:
    16
    It's only the hpt that has an adjustable actuator
     
  5. Okoye

    Okoye Member

    Joined:
    Oct 12, 2014
    Posts:
    40
    Likes Received:
    0
    My us spec car has an adjustable one.
     
  6. Andy318ti

    Andy318ti Active Member

    Joined:
    Mar 3, 2014
    Posts:
    987
    Likes Received:
    48
    Clean the pcv system, the black box under the inlet needs to be clear of obstruction or it'll likely push oil from all seals.
    If it's a healthy car it shouldn't need much other than the usual timing belt, water pump, stat, plugs, leads, dizzy cap and rotor.
    Then get a manual boost controller and turn it up you'll not get much before fuel cut but a noticeable improvement.
    If you up the boost you need to help it breath better so remove the cat or go full 3" if possible.
    If you bought chips to put in the ecu's you could run more boost but the standard 13c is a heat pump above 13psi.
     
  7. themdngtgarage

    themdngtgarage New Member

    Joined:
    May 17, 2016
    Posts:
    10
    Likes Received:
    3
    2m84hkx.

    well its 15.42 right now and we havent started because the guy that drove it last didnt fill up the tank.

    2qsunv7.

    we are off to a great start lol !
     

    Attached Files:

    #7 themdngtgarage, May 26, 2017
    Last edited: May 26, 2017
  8. themdngtgarage

    themdngtgarage New Member

    Joined:
    May 17, 2016
    Posts:
    10
    Likes Received:
    3
    its in, time to start!

    E2RljDe.
     
  9. 5M0K3

    5M0K3 New Member

    Joined:
    May 13, 2017
    Posts:
    20
    Likes Received:
    1
    lol nice.
     
  10. themdngtgarage

    themdngtgarage New Member

    Joined:
    May 17, 2016
    Posts:
    10
    Likes Received:
    3
  11. themdngtgarage

    themdngtgarage New Member

    Joined:
    May 17, 2016
    Posts:
    10
    Likes Received:
    3
    [​IMG]

    getting there

    [​IMG]

    suspension work

    [​IMG]

    gutting the interior
     
  12. themdngtgarage

    themdngtgarage New Member

    Joined:
    May 17, 2016
    Posts:
    10
    Likes Received:
    3
    [​IMG]

    needs more low though
     
  13. themdngtgarage

    themdngtgarage New Member

    Joined:
    May 17, 2016
    Posts:
    10
    Likes Received:
    3
    almost halfway

    [​IMG]

    welding the diff

    EYEiaA3.
     
  14. themdngtgarage

    themdngtgarage New Member

    Joined:
    May 17, 2016
    Posts:
    10
    Likes Received:
    3


    video is done (kinda long so just warning you if you dont like long vids. the volvo is done around the 20 minute mark somewhere)

    more pictures are still to come but we are having too much fun driving it right now so those will come later haha
     
  15. themdngtgarage

    themdngtgarage New Member

    Joined:
    May 17, 2016
    Posts:
    10
    Likes Received:
    3
    some driving shots





     
    • Like Like x 2
  16. themdngtgarage

    themdngtgarage New Member

    Joined:
    May 17, 2016
    Posts:
    10
    Likes Received:
    3
    more fun:

     
    • Like Like x 1
  17. 31_Coupe

    31_Coupe New Member

    Joined:
    Feb 27, 2016
    Posts:
    7
    Likes Received:
    0
    brilliant. Just brilliant.
     

Share This Page