Finally come to the conclusion that I have zero time for this, literally driven it a handful of times since mapping 6 months ago. The car itself is on around 75k miles and started life as an auto (properly converted in Japan before export). Most parts fitted are brand new, high quality and fucking expensive. The car was mapped by Greg at Protuner making just shy of 450hp, using the CT15 at 1.45 bar and it's super responsive as you'd expect. Spec below though I'm sure I'll miss bits. Engine/Trans': Hybrid CT15 with larger inconel wheels and shaft (will take 1.5bar) Turbosmart actuator Kazama F1 manifold Sard 850cc Sard fuel rail Sard 295lph pump Aeromotive FPR HKS filter Greddy FMIC Greddy rad' Profec (new style) set at 1.45bar HPI decat/elbow 3" oval exhaust made from Part Shop Max tube R154 - Redline oil Exedy Compe-D hyper twin clutch - sub 500 miles on this! HKS F-Con VPro (3.1) Handling/foot work: CST Zero coilovers - Swift springs 18/14kg Uras pillow ball bushed front tension rods JIC Magic rods/oem ends Ikeya Formula front upper camber arm Front spindles dropped 25mm, offset (increasing camber) and braced. Solves the turret/camber arm contact issue. KTS 25mm RCA's Front 15mm bolt on hubcentric spacer Ikeya Formula rear lower arm Ikeya Formula rear toe arm Ikeya Formula rear traction arm Ikeya Formula subframe locking collars Weld rear subframe bush collars Solid front diff mounts Tomei 2 way - Redline oil SuperPro poly bush for rear traction rod, hub side. Figs engineering spherical bearing for rear lower arm, hub side Hey man style knuckles - not fitted. Interior: Nardi 350mm deep corn wheel Bride Zieg iii Bride rail Greddy shift knob New style Profec Exterior: Full genuine BN sports aero BN Sports bonnet - came off the Magician 110! Ganador mirrors Kazama roof wing Kouki front lights Kouki rear lights Kouki boot trim Full respray in Mazda sparkling mica black Wheels: These may or may not come with the car but I have other decent wheels to put on - will discuss with potential buyer. SSR Minerva: F 18x10 +24/225.40's R 19x10.5 +18/245.35 Plate isn't included and also not for sale. Price: £15,000 No PX unless you have e9x m3 or v10 m5/6. No bullshit promises. Check my build thread for proper details or contact me if you're serious. Marc. {}
Bump for one of the nicest jzx110's out there bud Is that a tablet you are running where the sat nav screen is with a Defi smart meter?
Thanks man. It is, only half way there so far, just haven't had time to make it work properly. Everything I have including the tablet will come with the car mind.
Lovely car, Good luck dude, i got nothing but shit from timewasters/dreamers so i just removed from sale.