1. ifyoucantbeate

    Joined:
    Jan 25, 2015
    Posts:
    81
    Likes Received:
    5
    So I thought I'd post something up here as I've been building this and Instagram is getting a bit boring to follow after reading a few threads again and reveling in the fact this forum hasn't died... Here we go.

    So long story short I saved for a house deposit went to the bank and was told they wouldn't give me one yet as I was self employed, threw a bit of a strop and bought my chaser instead.

    This was all I was shown a relatively straight bar the shown damage, non aero, factory manual car the deal was made and I waited for it to come

    I collected the car from port of Tyne and drove it for an mot, passed with no problems after getting it a battery as it was absolutely dead when it came off the boat... Wouldn't idle wouldn't even charge

    It also became apparent on this drive the clutch was done for aswell. So it got a battery, an mot and put away while I waited on the dvla to do their stuff

    FB_IMG_1522767119692.

    FB_IMG_1522767130189.

    FB_IMG_1522767124593.
     
  2. ifyoucantbeate

    Joined:
    Jan 25, 2015
    Posts:
    81
    Likes Received:
    5
    Once it was registered I took it with me weekly working away and then popped to see Ben Hau who did the clutch/service as I just simply didn't have any time for it being self employed now

    FB_IMG_1532955878546.

    FB_IMG_1532955906477.

    received_10156158526765359.
     
  3. ifyoucantbeate

    Joined:
    Jan 25, 2015
    Posts:
    81
    Likes Received:
    5
    Then I slowly started to find some things I wanted. Mainly factory aero which jesus I wish I'd got a car with already because it was not nice to find over here. Got the front lip local as well as a spoiler since mine just had holes in the bootlid. I then bought some custom Made vented wings as mine were rolled by stevie wonder in Japan. Finally I found the skirts and rear lip. I also got some vsmx in 9.5 10.5 which were fine but now looking to change the fronts for something wider for the wings.

    IMG_20180720_175242.

    IMG_20180804_181748.
     
  4. ifyoucantbeate

    Joined:
    Jan 25, 2015
    Posts:
    81
    Likes Received:
    5
    Just a bit wider

    IMG_20180906_144616.

    IMG_20181018_161908.
     
  5. ifyoucantbeate

    Joined:
    Jan 25, 2015
    Posts:
    81
    Likes Received:
    5
    And really that brings us up to date, I have an hks intercooler coming from up garage atm as well as some super now tie rod ends, rod extenders, new hubs and lower arms. It already has a full set of kts rear arms, boost controller, turbo timer, fujitsubo exhaust and I installed a jpipe delete aswell

    IMG_20180627_132924.

    received_1683530035090996.
     
  6. ifyoucantbeate

    Joined:
    Jan 25, 2015
    Posts:
    81
    Likes Received:
    5
    And sat with the 32 sorting out aswell

    IMG_20180906_152409.

    IMG_20181019_105940.

    IMG_20180831_143159.
     
  7. counteract

    counteract -o=me

    Joined:
    May 13, 2007
    Posts:
    4,673
    Likes Received:
    28
    This looks good!

    Are you just going to paint the plastic lower door trims?
     
  8. BenRice

    BenRice Well-Known Member

    Joined:
    Apr 23, 2014
    Posts:
    1,771
    Likes Received:
    300
    Looking perfect!
     
    • Like Like x 1
  9. ifyoucantbeate

    Joined:
    Jan 25, 2015
    Posts:
    81
    Likes Received:
    5
    I'm intending to, body wise I'm gunna run a dmax spoiler and maybe a vertex front bumper and then get a full shoot now I'm in a bigger unit.
     
  10. EMAGDNIM

    EMAGDNIM Member

    Joined:
    Mar 27, 2009
    Posts:
    106
    Likes Received:
    14
    I'm all in to see what you have planned for this!
     
  11. Bu11et

    Bu11et Well-Known Member

    Joined:
    Jun 10, 2010
    Posts:
    1,887
    Likes Received:
    259
    Wow, this looks ace mate, you going to be drifting it?
     
  12. ifyoucantbeate

    Joined:
    Jan 25, 2015
    Posts:
    81
    Likes Received:
    5
    It came in with pre japan drift damage on the osr so it would be rude not to carry on with it... Just tidying it up to my style and mechanically as it feels a bit vague currently. Etcs controller is here and intend to get it out properly next year
     
    • Like Like x 1
  13. ifyoucantbeate

    Joined:
    Jan 25, 2015
    Posts:
    81
    Likes Received:
    5
    Had a little parcel from streeter this week, also have a big order of hardrace stuff coming as its 20% off through rival motorsports

    IMG_20181119_153744.

    IMG_20181119_160259.

    IMG_20181119_175736.

    IMG_20181119_180107.
     

Share This Page