Hi all... today I’m tackling the front lower controll arms.. before I tighten up I want to check I’m heading in the right direction and they are the right way around.. {} Also should the tension rod go through both holes?? {} I’m thinking the sway bar should fit into the furthest hole.. Any info would be great
Follow this procedure, Make sure you rearrange you tools plus all the equipment orderly before you begin to fit ,this will help you a lot in making proper set up
That’s all wrong anyways don’t drive the car please. It’s hard to explain coz you’ve too much wrong. I’ll try find a good picture for ya.
Cheers.. it took me awhile but I figured it out... the spacer went into the lower part on the arm and the bolts through both holes, with the silver gear washer goes on top like above.. It took me about 9 hrs to do both sides because I had trouble again removing the old split pins as they broke but nothing a grinder couldn’t sort out! {}