91 S13 for sale VGC

Thread in 'Drift cars for sale' started by ferretca18, Jun 13, 2007.

  1. ferretca18

    ferretca18 Member

    Joined:
    Dec 19, 2005
    Posts:
    63
    Likes Received:
    0
    Hi guys and girls,
    the time has come for me to sell my pride and joy as i need the money for travelling. Here are the specs:

    The chassis has covered approximately 97000 miles.
    Has 5 months tax and 11 months MOT (flew through the last one)

    Engine:
    Norris Designs rebuilt CA18DET covered approx 11000 miles, never missed a beat, runs perfectly
    Colder plugs ( BCPR 11es)
    Norris Designs Stage 2 T28 turbo (same age as engine)
    Apex 2 3/4 stainless frontpipe
    Apex single box exhaust
    Apex FMIC
    Cusco catch tank
    Uprated Apex oil return for the turbo
    Blitz Stainless LM filter
    Kenlowe electric fan and thermostat
    LUK clutch
    Jezz stage 2 chip
    Varley red top battery

    Chassis:
    Apex coilovers, 8/6 kg/mm spring rates
    Apex 310mm big brake kit utilising S14 calipers (refurbed when purchased)
    Goodridge stainless lines (rear not fitted yet)
    S14 BMC
    Ferrodo DS2500 firont pads and ebc blackstuff rears.
    Cusco OS front strut brace
    Solid steering bush
    Arospeed RS-GT 18" wheels with Falken FK452 225/45/18 all round (new)

    Body:
    Despoilered, rust free bootlid
    Carbon bonnet, vented

    Interior:
    Chargespeed fixed back bucket seats (these are small seats but work exceptionally well) drivers side on bride copy subframe, passenger side on bride.
    Sparco steering wheel
    Nismo gearknob
    Budget pioneer cd player (it works) jbl gto 6*4 in origional positions all round.


    The car runs like a dream, handles exceptionally well (this is set up more as a fast road car than a drift car). The Jezz map isnt quite right for the turbo and as such there is a bit of a flat spot mid range but once on boost the car absolutely flies! for the best performance i would reccomend a remap by Jezz:nod:

    here are some pics of the car and a video of her running.

    P1010065.

    P1010064.

    P1010077.

    P1010078.

    P1010079.

    P1010061.

    P1010595.

    PIC_0058_1.

    P1010069.

    P1010070.

    P1010071.

    P1010072.

    P1010076.

    P1010082.
     
  2. ferretca18

    ferretca18 Member

    Joined:
    Dec 19, 2005
    Posts:
    63
    Likes Received:
    0
    P1010083.

    P1010080.

    Copyoffitted.

    some pics of the inside of the bootlid, you dont see this too iften:)
    P1010075.

    P1010073.

    CopyofP1010136.

    hopefully there should be a vid embedded below of the car being started and revved so you can see there are not rattles/ knocks etc:

    th_Produce_1.



    POINTS TO NOTE:
    the car does have its imperfections:
    there is a bit of rust on the car, the turret sides have a little rust, this has been treated with anti rusting agents but would ideally be cut out plated and filled (i was going to do this myself but have run out of time)

    The sills have been plated, I recently bought full sills from a reccomended panel beater, these are full length sills. I intended to fit these prior to sale but have run out of money, these will be sold with the car as they are 110 per side from nissan :eek:

    There is a noise comming from the thrust bearing occasionally (like a whirring/ slight scraping noise, cant really describe it) this is due to the thrust bearing not being replaced like i asked when i had the clutch changed.

    The bootlid was filled and sprayed by myself, its not a bad job but its not perfectly flat up close with the sun on it and it has rubbed through to the primer in 2 spots (one on the edge and one over a spot where the rear wiper used to be)

    As said earlier, the car would behave totally differently with a remap from Jezz, as it stands its perfectly driveable in all conditions but you need to be aware of the flatspot. (im making this sound worse than it actually is)

    The car has always been garaged and has been very well looked after, with mobil one oil changes less than every 3000 mile (all reciepts to prove) and also has never run on anything other than optimax/ v-power (reciepts to prove)
    heres a pic of the folder full of service history:
    P1010063.


    I have invested (not sure thats the right word lol) a lot of money in this car and it has served me very well. I will return to a CA powered S body at some point in the future.


    I am asking for offers around £3300, and am open to some haggling.
    I THINK thats everything, if you have any questions please PM me or reply to this thread
    Thanks for looking,
    Allan

    Also, heres a link to some of the work that i have done on the car:

    ferretca18's project page - SXOC Bulletin Board
     
  3. ferretca18

    ferretca18 Member

    Joined:
    Dec 19, 2005
    Posts:
    63
    Likes Received:
    0
    oh yea, one more thing, the car is running approximately 290 bhp at 16psi
    (ran 305 at 17psi but i dont trust the company that did it anymore)
     
  4. Razer

    Razer Member

    Joined:
    Sep 25, 2004
    Posts:
    160
    Likes Received:
    0
    Where are you located?
     
  5. mammoth

    mammoth Member

    Joined:
    Aug 12, 2004
    Posts:
    106
    Likes Received:
    0
    he's near plymouth in devon :)
     
  6. the midnite drifta

    Joined:
    Aug 22, 2005
    Posts:
    435
    Likes Received:
    0
    which is a fcuking long way from norway.
     
  7. Razer

    Razer Member

    Joined:
    Sep 25, 2004
    Posts:
    160
    Likes Received:
    0
    Wich I don't fcuking care about. How far is it from Newcastle?

    You see, Japan is even more fcuking long way from Norway, so the UK is actually quite close.

    Now, do you fcuking understand? ;) Just had to :D:D
     
  8. ferretca18

    ferretca18 Member

    Joined:
    Dec 19, 2005
    Posts:
    63
    Likes Received:
    0
    hello mate, yea im located beside Plymouth in the South west, a loooong way away from Newcastle:( i think you can fly to Bristol though for not a lot and thats a driveable distance:) :thumbs:
     
  9. ferretca18

    ferretca18 Member

    Joined:
    Dec 19, 2005
    Posts:
    63
    Likes Received:
    0
    Thanks for the interest guys but the car is provisionally sold:)
    cheers
    allan
     
  10. Dan Norton

    Dan Norton Active Member

    Joined:
    May 31, 2005
    Posts:
    2,085
    Likes Received:
    0
    Nice clean car mate, didnt think it would hang around too long.
     
  11. ferretca18

    ferretca18 Member

    Joined:
    Dec 19, 2005
    Posts:
    63
    Likes Received:
    0
    cheers, i thought i would be hanging around for a few weeks waiting for a bit of interested. nice to see others are interested in a car i put a lot of effort into :thumbs:

    ill be back in an s body eventually:nod:
     

Share This Page