Separate names with a comma.
Still have it? PM me your phone number please.
CE70 pedal box doesn't work straight off as it's designed for steering box.
You'll need to mod the clutch pedal to clear the steering column as I...
They should be FC3S RX7 calipers rebadged as SS Works. Take out a pad and measure it's dimensions.
You can remove the angled filter housing if you are still caught for space, you will need to buy a new filter screw from Toyota P/N 90404‑19001 I...
There's an o-ring that can be replaced in the hydro water pump and it will be just like new. I'm sure Google will help you to track it down.
T3, Tein Cusco for top mounts??
I have put about 100K Km on Tein ones
Techno Toy Tuning - Your performance parts source for the old school cool!
Diagnostics is handy, you could lengthen it to fit under the dash, you can remove the unnecessary wiring from it. Also won't need the fuel pump...
Bought an AJPS high mount for my Charmant, low mount should suit FWD
AJPS - Kelway Turbo Manifolds 'Big Wheel Spin Version'
At the relay box by the battery there is a 2 pin connector
Yellow is ignition supply for the injectors
Black/Red needs to be connected to...
The 2 connectors that have the wiring wrapped in blue tape
In the clear yellow connector
Wipers are different in a UK car this is listed...
In the grey body loom connector
1 B/W A/C Air-Con
2 R/W Batt +B
3 Blue FP Fuel Pump Relay
4 Br Earth Earth
Answers under each picture
The Corolla loom is fairly straight forward with only wipers and reverse lights being the non engine wiring in the loom. Locate whatever sensors...
Had a look around and came up with 7/16 24tpi can anyone confirm?
I'm fitting a T25G to a 4AG and bought an AN8 bolt on oil drain and weld on return. I see on Garrett's site that they recommend at least AN10. Has...
KE70, EP70 probably carb'd EP80 also
Think they are about 50 Euro new out of Toyota if you are that way inclined.
AE86 injectors are black and grey and are 182cc 2.3 Ohms, AE92 Tvis injectors are pink 200cc and 2.3 Ohms and AE92 small port are green 235cc and...
You could get a Trust sandwich plate
Trust GReddy Engine Oil Block Adapter Type E 57mm
and replace the 2 blanks with sensor adaptors
They changed when the AE101 was released but I don't have any to compare with the early type.