Separate names with a comma.
You might have extended tie rods. Pretty sure S14 inner tie rods are shorter but same thread sizes but can't confirm. Have a Google and see...
Ah, which chassis?
You'll need a front half that has a RB25DET transmission yoke (different to RB20DET transmission yoke) If finding an R33 manual front half of a...
I know 17's are practical up front but 18's just fill it so much better. Hope the 35 profile works! Any shots of it aired up to show the difference?
So still have this as no one wanted to pay me $7k for it so gave it an oil change & took it out again [ATTACH] [ATTACH] [ATTACH] First lap out...
4WD & RWD sump bolt patterns are different so no swappy swappy R33 gearbox bolts up, as does every other RB gearbox Any other questions?
And full credit for keeping under the radar & full interior. Man after my own heart
Bucket seat to hold you in place & coilovers Then make sure she's serviced (fresh engine oil, gearbox oil, clutch adjusted, brake pads have...
BOV leaking? It's worth making a blanking plate and blocking off the BOV Unbolt the BOV, use the gasket to trace out shape on a sheet of...
Cool. Can you add a picture of the engine bay? A picture says a thousand words & much easier to see if anything is out of place
Strange question, but how clean is the air filter? Will it run with no air filter on it?
Considering it runs without the MAF plugged in i think it's electrical Considering what you've said & the age of the car I would suspect it's...
Congrats! Long time coming dude
Are you wanting 450hp at the wheels or crank? My 25 is set up similarly and makes 263kw / 355hp at the wheels. A guess at the crank is ~420hp If...
Overspeccing the daily to tow & hiring a trailer is the best idea. You don't have to go too overspec tho, you're only towing 2% of the vehicles...
Chin up boy. Have seen that happen before, and by experienced painters Bottle up the frustration and unleash it in a gigantic burnout once it's...
So took the valve cover off and checked the lifters & rockers. No issues there but quite gunked up [ATTACH] [ATTACH] Found a bit of...
Dude, what paint is that! Looks like it sticks to anything Btw - for your idle-catch issues try put a plate in between the BOV & adaptor to see...
First lot in (should really have cleaned up the wheels!) [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [MEDIA]
Didn't connect any of those wires If you have the DET ECU and loom then might be better to use them. You will still need to swap to a CAS instead...