Separate names with a comma.
18x10 et30, 5x120.
Work Seeker in excellent condition, no kerb rash to the lips or damage to the faces.
A little friction scuff on the back of...
Let me know if you got any plans to sell it, I’ll take it off your hands :wave:
Let me know if you’re genuinely serious about selling the engine/bottom end.
Imo that head is perfect for a turbo engine, but the high comp might...
very useful site
The redtop or 'straightcam' is the earlier version of the SR, which has no VVT. The blacktop 'straightcam' is a later version of that engine which...
Yes they will be the same :)
To the best of my knowledge, sr boxes all have the same internals as r32, and the boxes on ca s13’s.
Only difference is the ratios are a little...
If you google ‘sr20 Baulk ring’, you’ll find the synchros you want.
And the bearings will have numbers on them, they’re easy to find also, some...
Yea cut the sleeve out
Technically, yea you do. As you torque a bolt it stretches, though when i last did mine i went 5nm less and used a strong loctite.
Stock ecu has like a ‘get you home’ feature, where if your maf is completely dead, engine will still run. You can check it at the plug with a...
This company is in Ireland.
Price and a basic spec would probably help the sale
Top quality first post. When you finishing it?
It's 1mm. You literally won't ever notice the difference.
You could notch the piston at a machine shop, if it's barely touching now, it'll be worse with heat and force applied. If the pistons break a...
Just ring driftworks, 99.9% certain they supply new joints.
Bin the generic chips off and get a proper ecu and map