Separate names with a comma.
Doesn't it go to the neck of the radiator? The small little connection just under the rad cap.
That's pretty poor. You've got far too large a turbo on there putting out far too little power.
You could get the same results from a much...
Is that 345hp measured at the wheels?
Paddle clutch would probably last longer, but you might find it damages the flywheel, especially if you're clutch kicking it too much.
You'd need to refer to the Toyota manual, it should have information in on how to properly measure freeplay and the acceptable limits.
There's a few things you can try to unclog stuck rings:
AFT down the bores, let it sit for several days
Penetrating oil down the bores, let it...
A compression test doesn't necessarily show your oil control rings are in good order. Your oil control rings can be gummed up and not clearing...
215 tyre is quite a stretch on a 9 or 9.5J wheel. Fine if you want scene points, but I wouldn't say it's fully practical on our fucked up roads....
Might handle a touch better with 8J up front.
Be aware that alot of people will have run massively stretched tyres, loads of camber or just put up with excess rubbing to claim their tyre...
Ducting through the rear 1/4 windows an option?
You gave that guy £150?? Are you completely fu*king stupid?
Pretty sure Bride were going to take him to court for selling fakes.
ProTuner have an excellent reputation, if they're putting their name behind something important like injectors it's a safe bet they're top quality.
Yea be very careful, lots of fakes and rubbish drilled out stock injectors on the market. Get them from somewhere reputable....
I'd be looking at HardRace rubber bushes if you dislike Polybush.
Those are big chunks they ain't shavings.
It could have possibly kicked a bearing or something in a previous lifetime and the owner never bothered...
Long gone are the days you can pick up a running engine for £100 or upgrade it to an SR for £500.
New cams. If the head is coming off get the valve guides and stem seals done, then skim the head. Should be hot tanked after all that so will...
Not exactly a powerhouse, can't see why you'd bother with it in America.