Separate names with a comma.
So it has been quite a while, but life took its turn and I had to pause my build for a few months as there quite simply wasn't money to buy the...
From the service manual the wiring for the AFM should be: Pin 1: Signal + Pin 2: Signal - Pin 3: +12 and the shield needs to be grounded There is...
What injectors are you running? Mine behaved a bit like that when I had larger injectors on the stock ECU. And have you verified that you have...
Regarding running the vacuum lines for all of your boost-control, I would refer to someone like Turbosmart, they have mounting instructions...
Sorry, have only just seen this now - but good to hear that you at least got some life into it. Also, from the wiring diagram I am referencing,...
If you see 12v on F24-Pin1 then you should also see it at the coils, again on pin 1, as there shouldn't be any connections, relays er such between...
No problems - we need more S15's on the road, so happy to help. BTW, the wiring schematics for the OEM coils is EC-112 and 113 in the service...
I don't know if the plugs are different, but then te Spec S runs the distributer, so wouldn't need the +12v for te coils... It is worth...
Sorry, that's Pin 1 on the Audi coil that is +12v. From looking at the wiring diagram, your OEM coils should have the following connections/pins:...
It sounds like you might need to follow the +12v along to see if there is a bad connection, or maybe a bad relay - they should see a constant 12v...
Here's the braking-chapter from the S15 service manual, there's a part about ABS which has wiring diagrams:...
Carrying on from the last update, I am in the midst of moving the car into a new place [ATTACH] One of the things that has always annoyed med...
Yeah I got lucky... I still have a little catching up to do here before I am actually up to date with where the car is today, but I snuck in some...
It is definately the easiest way, but I just think that DET-engines have gone way up in price, but I lucked into this complete swap for £900, so I...
Moving on to July 2018, I had finally saved up enough money to get a new, much needed suspension for the car - settled on a set of DS/DA-series BC...
Yeah I went through the same research early on in my planning stages for the turbo build, and for some reason the S15 NA ECU is something of a...
Cheers guys! I took the oil feed from the oil-block, using an AN-10 extension with a 1/8NPT in it, then just AN-4 all the way round to the...
Cage
Started to rip everything out of the interior in preparation for the cage [ATTACH] Getting everything out from behind the dashbar proved harder...
On this next installment we jump from the beginning of May 2017 where I had my only driftday in the car so far, to September 2017 where I moved...