Separate names with a comma.
All gone.
Should add, I have all brake and fuel lines, Walbro etc. Original rad, spare headlight assemblies, oem suspension, if that's what someone wants....
Time to admit defeat. Have owned since 2005, had a small bump Sept 2013. Always my intention to build into Fast road car, but I knacked my back a...
This was what some considered E P 1 C; http://www.driftworks.com/forum/drifting-video-pictures/54487-my-first-rolling-burnout.html Just an...
I'm sure there's something missing.
Sorry to see that fella, you've put a lot of work into it. Know what caused it yet?
Black writing on a dark grey background.
Put this link up a few times, don't know if anyone's used them though. 15 x 8 BLACK D MOD RIMS For JEEP 5.114.3 PCD 4x4s | eBay
Manhoolee, at least edit out your posts now you've found out it's a different company.
Check the cambelt, sounds like it's one tooth out. Don't trust the marks, count the teeth. 48 from crank to exhaust, 39 from exhaust to inlet.
I take it his landline and mobile no. aren't what you're after?
Turbonoz
Did he tell you H-Dev said it was a 28 or did they? Be surprised if it was them.
This should help, although as Steve says that won't be too far out. Any HT lead will do, if you don't have one just buy a cheapy one £4 at most....
Use the take off from your T25 and tap it into outlet like this; [IMG] H-Dev Stage 2 is 15 psi
Pack Of 5 Ice Hockey Pucks - Black x 5 | eBay And some 10mm bar, washers and nuts. Shouldn't cost you more than £10 all in. Didn't like them on...
Throttle Position Sensor, little black plastic box mounted to the RHS of the throttle body as you look at the engine from the front. Has a 7mm...
Check the earth strap where it bolts to the battery tray and the plenum. Had the same issue, because I had so many engines in bits I used a bolt...
May be useful to you; 09.10.2005: Garrett T25 Turbo Rebuild - photo.platonoff.com
Need a BIG hammer. S13 Vg30dett Good luck
