Separate names with a comma.
This still for sale?
Well you can check that. Put the bevel box on a flat horizontal service using a water-level to make sure its spot on horizontal. Calibrate the...
Of course, however change your subframe bushes -> + 50 quid Change coilovers -> + 50 quid Change tie-rod -> + 50 quid Change suspension bush or...
Yeah that's the principle of laser-alignment, you align on the base of your wheels. The plus side is that its fast and easy, the downside is that...
How do you do it? Cause I'm sure my way is maybe too complicated but nobody has showed my anything better :( ..
I think you are misunderstanding. It doesn't matter if you have stagger or not. As long as the outer edges of the 'box' (strings) are symmetrical...
One day I thought, 50 bucks for doing an alignment is ridiculous, especially if you have to do it after each mod. So I started doing it myself....
More importantly, what (oil)temperatures are you running?
No problem in the wet, in the dry the inner wheel will lock a bit less but still driftable (1st and 2nd gear) if you have crappy tires at 2.5bar :D
You need a 2JZ [img]
Seriously, how do you do that?!
What he said, I think they're ridiculously underpriced for the great performance. I'm doing my 3rd set now and still happy. F1s will be better in...
On the German SXOC, we came to the conclusion that SR boxes are nearly the same strenght as CA, and both will not last long if you run more than...
Jason just hit the nail on the head there, I was trying to find that article with no succes. But again like Jason said, make sure everything is up...
Oil temperature gauge Oil cooler 5W50 quality oil Warm it up to 65-70 before ragging (this takes quite a while, 5-8 miles on my car) Change oil...
Harnesses are adjustable. It is also a very risky business if you install them wrong, even by a bit, better make (very) sure what you are doing,...
I have a cometic one which is performing very well. A lot of high-spec engines at SXOC also run (or have ran) Cometics without a problem, good...
Many thanks guys, I think .. no I AM going to do the following: 1. Remove thermostat en check, and check the jighole or whatever :wack: 2. Drain...
Wow, epic reply majic! - Sounds like sense, from top to bottom. - So I can use water + water wetter + some glycol for a perfect coolant mixture?...
A jiggle pin? WTH is that? I doubt it is air, I had the temp sensor out and filled up the rad, no air came out. Then let it run with the cap off,...