Separate names with a comma.
hello, selling my forged ca18det with about 8k km, everything works just fine, compression is checked. selling as a full swap(gearbox, engine,...
hi guys,after a long time I'm almost ready to start my engine, it has been resting in my bedroom for far too long, I would like to have a...
- S14 Zenki ECU + Type 3 Nistune - 2x R35 MAF’s - 3” Intake pipe with bung welded on This setup is compatible with both CA18DET & SR20DET (S14...
hello, can someone help me out identifie these metal flakes or atleast show me the right path what to do in this situation? long story short my...
Freshly rebuilt Garrett T25 (GT2552) Turbo. Standard on the CA18DET engine Ideal turbo for small displacement engines, providing great response...
Hi! Anyone have a picture of the ca18 dipstick tube seated into the block? Removed mine during rebuild without taking pictures first (stupid),...
Hello again, been mode active around my s13 laterly and rn im readoing my whole hot side, since my oem manifold cracked pretty bad and found out...
Hi all. I've just bought a 180sx with the ca18det engine and am looking for help, guidance and counselling on turning it up to a respectable...
hi i have problems with my ca18det where i dont get spark on cylinder 3. plugs and coil are ok. but i cant get an conection with ignition 3 from...
Selling my custom thick wall manifold for CA18. Stock location so will work with the standard elbow/exhaust setups 1.5" equal length runners...
Hello, so I’ve been having this issue with my ca18det where it will start to hesitate and misfire trying to rev over 4K. I’ve sorta narrowed it...
Hi guys , had this idle issue with my s13 ever since I bought it will idle fine when cold , as soon as it gets to working temp the revs pick up...
Hello everyone i got a problem with my 1991 S13 after instaling Stage 2 (Horsham) . For the chip i installed this stuff : 1. New turbo pipes...
Selling my unused set of DW 800CC Injectors, set is made for CA18DET S13, but should work in plenty of other cars too. Compatible with E85....
Hi All, I currently own a Focus ST225 but looking to get an S13 I've always loved this cars and looking to get a good base. Nothing to overly...
NO TIMEWASTERS, PLEASE READ THE DESCRIPTION. Any stupid offers will just be ignore, without trying to sound like a w*nker i'm bored of people...
hello guys, finally, after a long time, there are, I need some advice, I ordered all the spare parts for my ca18det, I wanted to get 500hp, as I...
Rebuilt T28R balanced by Best Turbos Has a 7/7 billet compressor wheel, brand new inconel turbine shaft, new BB cage, o-rings, piston rings etc....
I am on the lookout for an s13 ca18det wiring loom. The one with the fuse boxes that are in the engine bay. In an ideal world one from a non...
Hi all, I'm building a simple CA18DET, just for track, I removed: - Oil/water thermo and replace by aftermarket oil cooler with thermo. - IAC...
