tie rod ends?

Thread in 'Driftworks Products & Enquiries' started by TaxiDori, Oct 23, 2005.

  1. TaxiDori

    TaxiDori BEER CLINCH

    Joined:
    Apr 26, 2005
    Posts:
    6,297
    Likes Received:
    0
    found a split boot on my tie rod end today, so i need a new one.

    got an DW ones? in orange ;) ?
     
    #1 TaxiDori, Oct 23, 2005
  2. Jord

    Jord drifted.com

    Joined:
    Sep 17, 2004
    Posts:
    13,356
    Likes Received:
    0
    Think they are doing the Kazama ones soon, but they only fit with Tein rods IIRC.
     
    #2 Jord, Oct 23, 2005
  3. PhilMorrison

    PhilMorrison Driftworks Owner
    Staff Member

    Joined:
    Jul 20, 2004
    Posts:
    11,441
    Likes Received:
    80
    We have 30 sets of our own anti bump steer tie rod ends awaiting delivery of the final component. They are massively stronger than anything else we've seen on the market (Kazama, IkeyaFormula, Tuneagent etc). These are not copies, they have taken many many many days of our time to design and manufacture, and will be available for S13, S14, and Tein Tie rods.. :)

    I should be able to give you guys a completion date tomorrow :)
     
    #3 PhilMorrison, Oct 24, 2005
  4. TaxiDori

    TaxiDori BEER CLINCH

    Joined:
    Apr 26, 2005
    Posts:
    6,297
    Likes Received:
    0
    good good.

    will these need to be used with Tein or other tie rods?

    a stronger one would be good since i've busted one already, but i'm not sure if i have the wonger for the tie rods too. could be on the cards tho.
     
    #4 TaxiDori, Oct 24, 2005
  5. james

    james Administrator
    Staff Member

    Joined:
    Jul 20, 2004
    Posts:
    9,388
    Likes Received:
    32
    We're making a couple of different fitments so they will go with standard rods or Teins
     
    #5 james, Oct 24, 2005
  6. Jord

    Jord drifted.com

    Joined:
    Sep 17, 2004
    Posts:
    13,356
    Likes Received:
    0
    Im guessing the only down side being that if you buy the DW ends for the stock rods then upgrade to the Tein rods at some point in the future, you would need to buy the DW ends with Tein fitment. Goes without saying really.
     
    #6 Jord, Oct 25, 2005
  7. PhilMorrison

    PhilMorrison Driftworks Owner
    Staff Member

    Joined:
    Jul 20, 2004
    Posts:
    11,441
    Likes Received:
    80
    There would be a very cheap way to solve this, we'll be offering all the bits seperatly for those that are good at hitting walls etc :wack:, so all you would need is the different threaded hex section :)
     
    #7 PhilMorrison, Oct 25, 2005
  8. Jord

    Jord drifted.com

    Joined:
    Sep 17, 2004
    Posts:
    13,356
    Likes Received:
    0
    Ahhh good idea. I'm not that accomplised at walls yet, just cones and kerbs.
     
    #8 Jord, Oct 25, 2005
  9. TaxiDori

    TaxiDori BEER CLINCH

    Joined:
    Apr 26, 2005
    Posts:
    6,297
    Likes Received:
    0
    is crap too so just the ends for me.

    got an ETA on these yet? i need some by the weekend or next. any chance they'll be around by then?
     
    #9 TaxiDori, Oct 25, 2005
  10. PhilMorrison

    PhilMorrison Driftworks Owner
    Staff Member

    Joined:
    Jul 20, 2004
    Posts:
    11,441
    Likes Received:
    80
    Unfortunatly they won't be ready by then, we have the Tein rod ends available HERE but you'll need the Tein Tie rods as well :).
     
    #10 PhilMorrison, Oct 25, 2005
  11. TaxiDori

    TaxiDori BEER CLINCH

    Joined:
    Apr 26, 2005
    Posts:
    6,297
    Likes Received:
    0
    ok, i think i've found a real cheap bogo one to tide me over anyway.
     
    #11 TaxiDori, Oct 25, 2005
  12. PhilMorrison

    PhilMorrison Driftworks Owner
    Staff Member

    Joined:
    Jul 20, 2004
    Posts:
    11,441
    Likes Received:
    80
    Cool :)
     
    #12 PhilMorrison, Oct 25, 2005
(You must log in or sign up to post here.)

Share This Page