So for those of you that don't know, since the Outsiders | Facebook tour, we've all gone mad for RC Drifting at DWHQ. Apart from Kam, who thinks it's gay. After using a few different chassis, myself and Jay (bigjames) came across a company called "Max Speed Technology" - figured we'd test them out and... well, they are badass. You can litterally adjust everything, they have huge angle, CS, simple to work on and look pretty trick, without having to buy a bunch of extras for £££££££££££££££££££. Plus MST specialise in drift cars, no race cars, no buggys... for drifters, by drifters. Just like Driftworks has always been. Anyway, we figured they are so good, then all our actual cool cars got sold and we invested it all in becoming the MST dealers for the UK! So here's my own personal MST MS-01D VIP! Spec is: CHASSIS: MST MS-01D MST UK MS-01D VIP 4WD Electric Drift Car Chassis ARR - Blue MST UK - Exclusive distributors of MST RC products MOTOR: Keyence Luxon 7.5T with Active Hobby cooling plate ESC: Tekin RS PRO + Keyence capacitor SERVO: SAVOX CONTROLLER: Futaba 4PL + R2104GF reciver BATTERIES: Thunder Power 5000mah 65C (650amp burst power!) CS: 2.0 using MST 10T pulley MST UK Aluminium centre pulley 10T MST UK - Exclusive distributors of MST RC products using front belt 222 MST UK MS-01D Front Drive belt 222mm MST UK - Exclusive distributors of MST RC products PINION: 22 48DP MST UK MST 48P Pinion 22T MST UK - Exclusive distributors of MST RC products SPUR: 90T 48DP MST UK MST 48P Spur gear 90T MST UK - Exclusive distributors of MST RC products DAMPER SETTING: TN Racing bladder TN Racing O-ring front oil #350/soft spring rear oil #250/super soft spring FRONT SETTING: camber -11* castor 10* toe 1* out per side king pin angle max scrub correction +5mm upper / +2mm lower track with extended 4mm per side no kick up/anti-dive REAR SETTING: camber -8* castor 14* static toe 1* in toe on max bump 5* in scrub correction +2mm lower track extended 3mm per side anti squat 0.5mm ADDITIONAL: MST Alloy bumper brace MST UK Aluminium bumper support brace in blue MST UK - Exclusive distributors of MST RC products MST motor heatsink MST UK Aluminium motor heatsink in blue MST UK - Exclusive distributors of MST RC products MST CS complete kit (Included with Pro and VIP kits, along with the FS-01D front motor chassis) MST UK MS-01D CS pulley set (1.54/1.66/1.82) MST UK - Exclusive distributors of MST RC products MST 5 spoke super dished +11 wheels! MST UK Copper 5 spoke wheel +11 Offset MST UK - Exclusive distributors of MST RC products MST great angle CS tyres (HARDEST) MST UK Great angle CS tyre - Hardest MST UK - Exclusive distributors of MST RC products Team Tetsujin Intercooler (if you want Tetsujin parts drop me a PM) and the body i'm running... FT86!
^^^ The RTRs are awesome and miles and miles ahead of anything else i've tried in RTR format. This is also nice...
Thanks for the info mitto I looked on their website and they were out of stock do you know of anyway there is that I could get it and BTW nice shell
We can pre-order one for you, currently they are selling quicker than we can stock them! I'll drop you a pm later about pre-ordering as we have another shipment leaving early next week And thanks!
World-wide shipping is not a problem at all. Email sales@maxspeedtechnology.co.uk if you need any advice!
