1JZ TPS problem

Thread in 'Technical Questions' started by DouglasB, Aug 12, 2015.

  1. DouglasB

    DouglasB Member

    Joined:
    Mar 18, 2013
    Posts:
    442
    Likes Received:
    0
    I recently just got a 1jz but the throttle position sensor literally fell off on the way home and when it's been flopping about 3 of the 4 wires coming from it have pulled themselves out of the little black connector. My car was running like shit and wouldn't idle and if it did idle it would change between 1200 and 3000rpm.

    I've now got it to idle but only at 580rpm. I'm not sure if I've put the wires back in the wrong order and not wanting to mess about with the thing too much.

    Is there any chance someone could have a look at the colour order on the connector wires.
    I've got mine sitting black, white, blue, red.

    Not sure if I have the wires in the wrong place or if the TPS needs changed :(
     
  2. Arsenal96

    Arsenal96 Member

    Joined:
    Sep 7, 2014
    Posts:
    152
    Likes Received:
    0
    Hey bud I just had a look at mine, but mine are different colors.. from left to right mine are brown, black/red,red,black/yellow
     
  3. DouglasB

    DouglasB Member

    Joined:
    Mar 18, 2013
    Posts:
    442
    Likes Received:
    0

Share This Page