2001 Mazda RX7 spec RB 99,000 miles No rust Compression tested – 7.8, 7.7, 7.9 Imported in 2019 Full RE-Amemiya built car for Japanese time attack series 13B-REW 1308cc twin rotor engine, street ported engine running 430BHP @ 0.7 bar of boost (mapped in January 2023) Just finished a big single turbo build and total refurb, refresh, future proof project on the car with Advocult motorsport costing in access of £22,000 receipts / paperwork to prove with dyno print out. Over view of the build on (Advocult motorsport) YouTube channel As you can see it’s a perfect example that I’m very happy with, only listing to fund another project, and won’t take any stupid offers. Spec below: Borg Warner airwerks S363 SXE Turbo Borg Warner 80mm turbine housing Haltech elite 2500 ECU Walton motorsport exhaust manifold Turbo smart WG40 genV compgate V-mount alloy intercooler and radiator RE-Amemiya water swirl pot Greddy intake elbow Dragon Performance alloy pulleys RE-Amemiya 4inch dolphin tip exhaust system with rolled out tailpipe HKS EVC-S boost controller, custom alloy brackets. Radium engineering surge tank Radium primary fuel rail Radium secondary fuel rail Radium engineering pressure regulator Red top battery Brakes- AP Racing 4pot front calipers 330mm Project Mu 2 piece front discs Standard rear calipers with Project Mu 2piece rear discs Project Mu pads all round Suspension- Quantum Racing coilovers AutoExe front and rear strut braces Custom welded in chassis strengthening bars from RE Amemiya. Transmission- Factory 5 speed transmission 1.5way plated LSD Rear diff brace Gracing quick shifter Competition clutch stage 4 Exterior / interior RE-Amemiya Facer front bumper RE-Amemiya GT-AD II wide front and rear arches RE-Amemiya GT-AT II side skirts RE-Amemiya AD9 vented carbon bonnet (painted white) RE-Amemiya fender mirrors RE-Amemiya rear diffuser Carbon GT rear wing (painted white) Custom spoiler stands RE-Amemiya sleek headlights RE-Amemiya front splitter Carbon front canards, front wing vents, side steps, rear canards. Carshopglow rear lights Carshopglow rear lip spoiler Carshopglow bonnet vents Carshopglow lower front lights with built in repeaters, clear fender side repeaters Aero bonnet catches NRG prisma ultra red bucket seats TRS 4 point harnesses Sparco steering wheel NRG steering wheel hub and quick release Wheels+Tyres: 9×17 (front) 10×17 (rear) Rays Engineering CE28N forged monoblock wheels painted gloss black with 235/45×17 (front) and 255/40×17 (rear) Yokohama Advan Neova AD08 tyres. piston heads ad: https://www.pistonheads.com/buy/listing/15017662 Overview of build vid: {} {} {} {} {}