Right. Like a moron i bought this ecu without doing any research about my stagea. Because mines still auto this wont work. The other issue is that i have 1 of the 3 different stagea ecus used across the range which shares the same plug as an R34. In short, when i manualise it the ecu will work but i dont want to chop my loom so im going to just sell it and get an ecu when the works done and its manualised. Its a Microtech LT12S. Sequential fire v1.0 Nissan-6 ecu. It was previously on an RB20DET and will work with all RB's providing you tune it accordingly. It has MAP sensor so you can remove the afm which is a nice bonus. It has the BLUE PLUG, not the GREY 1-million pin plug. It comes complete with the nissan adapter harness and Microtech RS232 adapter. £250 delivered
My boc account needs paying off so want to shift this so I'm not too skint. £180 delivered. I will be listing it on eBay Sunday if there is no interest
I was asked this before by iceman. I actually don't know about that. The ad stated it came from an rb25. I did some research regarding vct and microtech and the consensus is that although it doesn't have a vct output it has aux outputs that you can do what you like with. Guys on skylineaustralia wire the vct pin to the aux output. This might already be done but I don't know as it wouldn't plug into my stagea