I need some space, so the random wheels have to go. All are used, most are perfectly good and usable, some are completely fucked. I am lead to believe that Hux is a master of wheel straightening if they need it, but we are not selling any of them for road use. All prices are inc vat, and exclude delivery. Delivery for a pair of wheels to the UK mainland will usually be £15. I haven't cleaned any of the wheels so there's lots of dirt and tyre past in the photos. I have spun these up on a balancer. and have put a mm measurement of run out at the inner lip, and outer lip. This is not to be taken as gospel as it's a 'by eye' rough measurement, but it gives you an idea.. For reference most brand new wheels have some run out. I measured 1 brand new Porsche wheel recently that cost £1000 at 2mm run out. Rota MXR - 18x11" ET8 - 5x114.3 Matt black centre gloss black lip. Pair 1 - £200 SOLD Wheel 1 = Inner 2mm, Outer good. - few nicks, scratches Wheel 2 = Inner 2mm Outer good - few nicks, scratches. http://www.driftworks.com/blog/wp-content/uploads/2015/11/MXR1.jpg Rota MXR - 18x11" ET8 - 5x114.3 Matt black centre gloss black lip. Pair 2 - £200 SOLD Wheel 1 = Inner 1mm, Outer 2mm. - few nicks, scratches Wheel 2 = Inner good Outer 2mm - slight rash. http://www.driftworks.com/blog/wp-content/uploads/2015/11/MXR2.jpg Rota MXR - 18x11" ET8 - 5x114.3 Matt black centre gloss black lip. Pair 3 - £170 SOLD This pair of wheels have had the centrebore machined out to fit over the axle on our DW86, so there is no option for a spigot ring or centre locating. Wheel 1 = Inner good, Outer 1mm. - slight rash Wheel 2 = Inner 2mm, Outer slight flat spot - slight rash. http://www.driftworks.com/blog/wp-content/uploads/2015/11/MXR3.jpg CCW 3 piece - 18x10.5 ET-15 (minus 15) 5x127 (5x5") 78mm centrebore. Matt black centre, gloss black lip. All have flaking powdercoat on the lips. Easy to make conversion spacers for 5x114.3 etc. Pair 1 £220 SOLD Wheel 1 = Inner 2mm, Outer 2mm - nicks and rash Wheel 2 = Inner 3mm, Outer 1mm - small nicks and rash http://www.driftworks.com/blog/wp-content/uploads/2015/11/CCW1.jpg Pair 2 £220 SOLD Wheel 1 = Inner 2mm, Outer 1mm - slight rash Wheel 2 = Inner 2mm, Outer 1mm - slight rash http://www.driftworks.com/blog/wp-content/uploads/2015/11/CCW2.jpg Pair 3 £120 SOLD Wheel 1 = Inner 4mm, Outer 1mm - rash Wheel 2 = Inner 15mm, Outer 8mm - pretty fucked! flatspotted, large nicks. http://www.driftworks.com/blog/wp-content/uploads/2015/11/CCW3.jpg Work Wheels M1R 2 piece - 18x10.5 ET -20 (minus 20) - 5x127 (5x5") - 78mm centrebore. Easy to make conversion spacers for 5x114.3 etc. 1 pair £250 SOLD Wheel 1 = Inner 1mm, outer 0mm, slight marks Wheel 2 = Inner 1mm, outer 0mm, serious 100mph gravel rash. http://www.driftworks.com/blog/wp-content/uploads/2015/11/M1R18.jpg Work Wheels M1R 2 piece Rdisk - 17x9 ET0 - 5x114.3 1 pair £200 Wheel 1 - Inner 0, Outer 0 - painted random bronze due to gravel rash Wheel 2 - inner 5, Outer fucked - Hux reckoned no problem. Work Wheels Emotion CR Kai 18x9.5 ET12 5x114.3 1 pair £200 SOLD They came on my S15. Both are pretty battered, loads of small chunks out of them and scratches and very badly painted black. Wheel 1 = Inner 2mm Outer 1mm Wheel 2 = Inner 5mm, Outer 1mm http://www.driftworks.com/blog/wp-content/uploads/2015/11/Emotion18.jpg Rota Grid 17x8 ET30 5x114.3 - White - We just bought these to test a tyre and suspension setting on the 86, so they have done about 2 miles. 1 pair £180 SOLD http://www.driftworks.com/blog/wp-content/uploads/2015/11/Grid1.jpg To purchase any of these wheels please drop us an e-mail to sales@driftworks.com or give us a ring in working hours Mon - Fri 0845 869 2555
Phil, Have just sent an email to sales I will take all the following CCW 3 piece - 18x10.5 ET-15 (minus 15) 5x127 (5x5") 78mm centrebore. Matt black centre, gloss black lip. All have flaking powdercoat on the lips. Easy to make conversion spacers for 5x114.3 etc. Pair 1 £220 Pair 2 £220 Pair 3 £120 Work Wheels M1R 2 piece - 18x10.5 ET -20 (minus 20) - 5x127 (5x5") - 78mm centrebore. Easy to make conversion spacers for 5x114.3 etc. 1 pair £250 Cheers Neil
Cool, Paypal address sales@driftworks.com. £30 delivery. Please make sure you mention what you are paying for.
I'll sort payment asap. I'll have to check if I can get them delivered to my work though. Would it be OK to pay now and sort postage tomorrow afternoon if I call or email.