A good friend of mine originally built the car before it was broken for parts so I was confident the loom had been done to a high standard. To be sure I stripped all the tape back and checked all the connections which were all well soldered and satisfactory. All plugs have been labelled to make installation very straight forward. Two things to mention. The loom is missing a MAF plug as the car was running a MAF-less setup. The wires are all there though so I wasn't too concerned as I planned to wire up an R35 MAF anyway. Also there is no diagnostic plug. Not vital and the car will obviously run without it but again, if you wanted to fit the plug the wires are there and labelled. Asking for what I paid £170 or best offer. Can be posted or collected from Reading area.
