S13 lows, what do I need to change?

Thread in 'Technical Questions' started by PurpleDrumstic, Aug 25, 2019.

  1. PurpleDrumstic

    PurpleDrumstic New Member

    Joined:
    Aug 25, 2015
    Posts:
    1
    Likes Received:
    0
    Hi all.

    I pulled an s13 out of a barn in March, it had been sat there 16 years so I decided the best route to go was bare shell resto.

    I've currently got it sat on a rollover jig and I'm cleaning all the underneath to bare metal so I know what I'm dealing with rot wise, and it's surprisingly not too bad.

    My plan is since I have essentially a blank canvas to do what I want with, I want to go low, like really low.

    I know I'm going to need to tub the front inner arches which are pretty rotten anyway and also raise the inner arch above the wheel. I'm also planning to make my own wiring looms to hide and reroute any wiring out of harms way.

    So my question is, what else do I need to do? Do I need to raise subframes or notch any chassis legs? I'd prefer to make sure I've got all metalwork done first. It's also going to be a road car not a drift car but I figured this was probably the best place to ask.

    Cheers
     
  2. krilex

    krilex New Member

    Joined:
    Feb 8, 2013
    Posts:
    21
    Likes Received:
    0

Share This Page