350z wiring advice

Thread in 'Technical Questions' started by Matt Wells, Oct 22, 2019.

  1. Matt Wells

    Matt Wells New Member

    Joined:
    Oct 22, 2019
    Posts:
    1
    Likes Received:
    0
    Location:
    Ashford
    Hi we are currently building a drift car for my son 2005 350z , before I get to involved can anyone help me with regards to the wiring, I would like to remove anything we don’t plan to use eg ABS/head lights /air con etc .we have built lots of race cars in the past , but would replace loom and ECU with a competition part, but can’t seem to find anyone that makes something like this for a 350 , I am happy to modify the original loom but am worried it will go into limp mode or not run at all any advice would be great thanks matt
     
  2. Primey

    Primey New Member

    Joined:
    Thursday
    Posts:
    2
    Likes Received:
    0
    Location:
    Leicestershire
    I unplugged the yaw sensor (under the centre console) and everything works, other than the ABC and TC
     
  3. Rippon766

    Rippon766 New Member

    Joined:
    Mar 1, 2019
    Posts:
    25
    Likes Received:
    0
    Location:
    Wolverhampton
    Mine is a Jap import (non VDC). I remove the large gray plug from the ABS module for drift days. This disables the TC and ABS. Could be easier than rewiring/new ecu.
     

Share This Page