84 ke70 panel van

Thread in 'Project Cars and Builds Threads' started by akasod, Apr 25, 2011.

  1. akasod

    akasod Member

    Joined:
    Jan 5, 2011
    Posts:
    744
    Likes Received:
    0
    well lads alot off ye will no it but here it go;s anyway i collected it dismorning
    needs a bit off work but its no to bad so what ye think
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    also pick these up dismorning for it the rear is 15+7.5 -7 and the front is 15+7.5 +6 so they will look cool till i can get some nice 13 or 14 in due time lol
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    and got meself a few bit for this today coilovers boss and wheel and 2 recaros im very happy with the way it sits now what ye think


    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    im not to sure about this but kinda looks cool
    [​IMG]
    [​IMG]
     
    #1 akasod, Apr 25, 2011
    Last edited: Oct 20, 2011
  2. akasod

    akasod Member

    Joined:
    Jan 5, 2011
    Posts:
    744
    Likes Received:
    0
    a few pictures in day light
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    then i got fed up looking at the dint in the back driver quater panel
    so here it go,s what ye think
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  3. akasod

    akasod Member

    Joined:
    Jan 5, 2011
    Posts:
    744
    Likes Received:
    0
    didnt get that much done today but the rear quater is farely straight now

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    done a small bit today on this done a small flare on the rear arch what ye thing

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  4. Adam.

    Adam. Member

    Joined:
    Oct 4, 2010
    Posts:
    495
    Likes Received:
    0
    Love KE70's. Been looking for one for a while, don't think I've seen a panel van KE70 before! Look forward to seeing what you do to this :)
     
  5. akasod

    akasod Member

    Joined:
    Jan 5, 2011
    Posts:
    744
    Likes Received:
    0
    well lads done another bit today and the rear arch is just finished
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  6. akasod

    akasod Member

    Joined:
    Jan 5, 2011
    Posts:
    744
    Likes Received:
    0
    well lads i done a bit more with this today i got all the engine bay cleaned and painted in its new colour e46 m3 steel grey im happy with the colour i picked

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  7. akasod

    akasod Member

    Joined:
    Jan 5, 2011
    Posts:
    744
    Likes Received:
    0
    well lads i was not happy with the arches so im makeing my own thanks to mannix for 2 mint vw mk2 golf wings that i cut up :lmao:

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  8. akasod

    akasod Member

    Joined:
    Jan 5, 2011
    Posts:
    744
    Likes Received:
    0
    here is what i dont today all welded up now and the iner arch all welded to

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    this is the passinger rear iner arch the only bit off rust to be found

    [​IMG]
    [​IMG]
    [​IMG]

    here is what i dont today all welded up now and the iner arch all welded to

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  9. akasod

    akasod Member

    Joined:
    Jan 5, 2011
    Posts:
    744
    Likes Received:
    0
    and here it the front wing flared and the coilovers down as far as they can go and plent off clearance so im happy with how the front sits and also just finished the back now what ye think

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  10. akasod

    akasod Member

    Joined:
    Jan 5, 2011
    Posts:
    744
    Likes Received:
    0
    here is a few quick pictures off the front and rear arch what ye think

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    here is the passinger door it was rotton on the bottom so had to fix it what ye think
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  11. akasod

    akasod Member

    Joined:
    Jan 5, 2011
    Posts:
    744
    Likes Received:
    0
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    well here is how see sat over the weekend

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    and here is the drivers door when i took it off
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  12. akasod

    akasod Member

    Joined:
    Jan 5, 2011
    Posts:
    744
    Likes Received:
    0
    here is a few bits i sorted today on this finished off the drivers door and there was a small bit off surface rust on the rear iner well so i cut it out and plated it up hope ye like the work
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    and the good old fire in the shed keep me warm
    [​IMG]
    [​IMG]
     
  13. counteract

    counteract -o=me

    Joined:
    May 13, 2007
    Posts:
    4,649
    Likes Received:
    25
    You keep putting up pictures of an empty engine bay... what's going in it?!?!?!!?! :D

    Looks so nice. If that picture above the arch is inspiration, I can't wait to see what you do with this!
     
  14. akasod

    akasod Member

    Joined:
    Jan 5, 2011
    Posts:
    744
    Likes Received:
    0
    well lads didnt get that much done today got me fender mirrors and fitted them before its painted and also took a picture off the chin spoiler what ye think
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  15. akasod

    akasod Member

    Joined:
    Jan 5, 2011
    Posts:
    744
    Likes Received:
    0
    woop woop i got these dismorning in the post im happy out now for the time being lol

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  16. akasod

    akasod Member

    Joined:
    Jan 5, 2011
    Posts:
    744
    Likes Received:
    0
    well lads done abit on the on the lights i had to cut the lip off the bonnet and i have to bring in the front bumper 2in to get everything to look right but getting there still a bit to do on the wings but its not going to be too bad
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  17. akasod

    akasod Member

    Joined:
    Jan 5, 2011
    Posts:
    744
    Likes Received:
    0
    done a bit off tidying on the passinger side have to start on the drivers side in the morning im happy enought with how it looks at the min you will see in the pictures the different is both sides what ye think

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  18. akasod

    akasod Member

    Joined:
    Jan 5, 2011
    Posts:
    744
    Likes Received:
    0
    right lads have the front nearly finished now but not happy with the chin spoiler as it dosent sit the way i want it to but not to worrie ill mod it to suit the rest off the front what ye think
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  19. Smilybrad

    Smilybrad Active Member

    Joined:
    Oct 8, 2008
    Posts:
    2,227
    Likes Received:
    0
    WANT! Looking really cool! and I want a KE70 more then anything!!
    What engine's going in?... 1uz!

    Brad =)
     
  20. akasod

    akasod Member

    Joined:
    Jan 5, 2011
    Posts:
    744
    Likes Received:
    0
    well lads i have the inside off the bonnet finished and painted and sticker bombed what ye think and started to fill the wings after the welding and grinding
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     

Share This Page