Anyone want a s13 project needs quite a bit of welding

Thread in 'Drift cars for sale' started by Jayspolishings, May 23, 2020.

  1. Jayspolishings

    Joined:
    Oct 28, 2014
    Posts:
    78
    Likes Received:
    1
    It needs quite a lot of welding / project.
    drivers floor has been cut out ready for a new floor pan,
    Will need some work on the rails to.

    The front is cut off to fit a tubed front but I changed plans and have managed to get a front for it so can be put back to standard if wanted.

    Comes with side glass
    Windscreen
    Boot and glass (boot has rust like they all have)

    Both subframes are solid and good condition,
    Comes with auto diff (better ratio).
    Driveshafts still attached.
    Can be rolled around and steering works.
    Has all suspension and brakes.
    Has rear lights and infill panels (think 1 light is chipped),
    Both number plates but no v5.
    Has roof liner, and a box of plastic inside panels.
    Petrol tank

    Also included is a full size sheet of 1mm steel and a mig welder with a full bottle of gas, 2 reels of wire, welding gloves and automatic helmet if wanted.

    I’m open to offers as I don’t have to time to have a project and it’s just sat on the drive. Shame for it to be sat there when someone could fix it up.

    Best to text or message on here as phone signal isn’t the greatest.
    Pm me or text for more pics 07711152424

    14CBC8A1-A655-47DB-B0C4-EE2846E73D0B.
     
  2. Jayspolishings

    Joined:
    Oct 28, 2014
    Posts:
    78
    Likes Received:
    1
    £300 without welder
    £400 with.

    location Norwich
     
  3. Jayspolishings

    Joined:
    Oct 28, 2014
    Posts:
    78
    Likes Received:
    1
    PM’s replies to.
     
  4. Jayspolishings

    Joined:
    Oct 28, 2014
    Posts:
    78
    Likes Received:
    1

Share This Page