BMW E30 V8 - BDC Ready - caged, fire sytem etc £5500

Thread in 'Drift cars for sale' started by PhillE30, Feb 28, 2015.

  1. PhillE30

    PhillE30 Member

    Joined:
    Mar 31, 2008
    Posts:
    965
    Likes Received:
    0
    Location:
    Basingstoke/Bentley
    'm thinking of parting with my e30 v8, it kills me to do so
    This car was built with money left by a family member who followed me building the car originally and wanted me to finish it, so it is not s light hearted decision!
    I have a lot of photos of the original engine conversion and most of the work carried out on the car
    The conversion was done by Robin at Rawmotorsport
    The car has a huge following
    It's a 1990 touring, non sunroof with a 4.0 m60b40 v8, 5 speed manual box with custom billet flywheel and helix clutch.
    When the engine went in it had a good going over and cleanup, all the bottem end was checked and sump/oil pump throughly cleaned and inspected
    Full 8 point weld in rollcage out to turrets etc by raw motorsport (same as BMW cup)
    Hsd E36 m3 evo coilovers with e36 m3 evo front hubs and brakes
    Compact rear end
    Full plumbed in fire system
    The engine conversion was done with a lot of thought and properly. Uses e30de replica mounts and genuine e34 540 oil filled rubber mounts, the engine sits low and as at back as possible.
    Oil filter housing relocated and a e36 m3 evo radiator used so no cutting of the chassis legs.
    A loom adapter has been made and the car loom has been trimmed and tucked.
    Brake servo is under the dash with a fabricated mount and linkage
    I have more than likely missed a lot of the spec, it comes with lots of spares too
    The car has always been road legal and 100% reliable and I have driven many 500+ mile journeys in it.
    It has been pbmw magazine featured with another possibly arranged and the focal point everywhere it goes
    Many of you will recognise the car, it needs work. I simply don't have time anymore with new work prospects and a young family.
    The car needs some work but it runs and drives and the price reflects that, please be aware this car doesn't have mint paintwork, it cleans and polishes well but was more of a purposeful build.
    the price also reflects that this a properly sorted conversion and would cost a lot more to achieve now!
    pm me for more details
    £5500


    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG][/FONT][/COLOR]
     
  2. PhillE30

    PhillE30 Member

    Joined:
    Mar 31, 2008
    Posts:
    965
    Likes Received:
    0
    Location:
    Basingstoke/Bentley
  3. Drift Dango

    Drift Dango Active Member

    Joined:
    Feb 25, 2009
    Posts:
    1,706
    Likes Received:
    1
    Location:
    Bolton
    So fast Jesus
     
  4. Drift Dango

    Drift Dango Active Member

    Joined:
    Feb 25, 2009
    Posts:
    1,706
    Likes Received:
    1
    Location:
    Bolton
    Sorry to thread jump but back up for sale
    Has had welding done
    New callipers front m3 Evo
    Battery
    Heater matrix
    Starter
    Fuel line
    Service
    Omp seat and harness
    Can come with or without dare wheels
    I bought new for it
    [​IMG][​IMG]
     
  5. wixsy

    wixsy Member

    Joined:
    Nov 20, 2004
    Posts:
    939
    Likes Received:
    0
    :-( I would
     
  6. superferris

    superferris New Member

    Joined:
    Dec 16, 2014
    Posts:
    2
    Likes Received:
    0
  7. fearless phil

    fearless phil Member

    Joined:
    Apr 27, 2013
    Posts:
    95
    Likes Received:
    0
    I want this car so bad!
     
  8. BreadBin

    BreadBin Rough Tonguer

    Joined:
    Apr 28, 2005
    Posts:
    784
    Likes Received:
    16
    Location:
    Wiltshire
    ^^ Buy it then!
     
  9. fearless phil

    fearless phil Member

    Joined:
    Apr 27, 2013
    Posts:
    95
    Likes Received:
    0
    cant justify that money on just a toy and the weld in cage means it would just be a toy! and o couldnt bring mself to cut the cage out to put an interior back in.

    no if i got the salary and silly bonuses that those A** hole bankers get id bite your arm off and give you a tip!
     
  10. BrotherGeorge

    BrotherGeorge Member

    Joined:
    Feb 13, 2014
    Posts:
    37
    Likes Received:
    0
    Is this still around
     
  11. Drift Dango

    Drift Dango Active Member

    Joined:
    Feb 25, 2009
    Posts:
    1,706
    Likes Received:
    1
    Location:
    Bolton
    Yea it's at smiley brads
     
  12. fas789

    fas789 Member

    Joined:
    May 5, 2014
    Posts:
    170
    Likes Received:
    2
    Hi could you pm me your contact number please
     
  13. Drift Dango

    Drift Dango Active Member

    Joined:
    Feb 25, 2009
    Posts:
    1,706
    Likes Received:
    1
    Location:
    Bolton
  14. Drift Dango

    Drift Dango Active Member

    Joined:
    Feb 25, 2009
    Posts:
    1,706
    Likes Received:
    1
    Location:
    Bolton
    Bdc legal and works as a car now too [emoji14]
     
  15. fas789

    fas789 Member

    Joined:
    May 5, 2014
    Posts:
    170
    Likes Received:
    2
    Contact number?
     
  16. boot103

    boot103 New Member

    Joined:
    Sep 1, 2014
    Posts:
    3
    Likes Received:
    0
    Hi, PM me. I'm interested..
     
  17. wixsy

    wixsy Member

    Joined:
    Nov 20, 2004
    Posts:
    939
    Likes Received:
    0
    Is it sold?
     
  18. bell

    bell Without patience

    Joined:
    Feb 17, 2006
    Posts:
    2,835
    Likes Received:
    0
    Location:
    wolverhampton, west mids
    Is the car for sale again? or has it been sorted to keep?
    If it is for sale id be quite interested and would like to know what the asking price is.
    cheers.
     
  19. Smilybrad

    Smilybrad Active Member

    Joined:
    Oct 8, 2008
    Posts:
    2,226
    Likes Received:
    0
    Location:
    Middlewich Cheshire
    Pretty sure its still for sale, and pretty awesome now the nigles have been sorted! such an easy car to drift and would have been good a BDC if the driver was any good ;)
    PM Karl (Drift Dango) as he has the car for sale, or message him on facebook!
    Brad =)
     
  20. bell

    bell Without patience

    Joined:
    Feb 17, 2006
    Posts:
    2,835
    Likes Received:
    0
    Location:
    wolverhampton, west mids
    Cheers brad.
    I'v seen the level of your work when i collected the e36 from your place a while back so if you've been playying it should be good.
    I'll drop karl a message to see what he has in mind.
     

Share This Page