BN Sports SR32

Thread in 'Project Cars and Builds Threads' started by driftescort, Apr 26, 2010.

  1. driftescort

    driftescort Active Member

    Joined:
    May 19, 2005
    Posts:
    5,428
    Likes Received:
    0
    That's what I'm thinking, you can't beat seat time!
     
  2. driftescort

    driftescort Active Member

    Joined:
    May 19, 2005
    Posts:
    5,428
    Likes Received:
    0
    I'm not sure to be honest, I had the boost turned up a bit and I would estimate the power at around 250bhp.

    It could do with more really as I found it used to die away in 3rd unless you clutch kicked the shit out of it! I suppose running 235 Federals with 0.5 negative camber static on the back dosent help either:D
     
  3. edewer

    edewer Member

    Joined:
    Apr 13, 2010
    Posts:
    97
    Likes Received:
    0
    argh another nice 32! its taking a lot to resist buying one right now lol!

    looks awesome!
     
  4. driftescort

    driftescort Active Member

    Joined:
    May 19, 2005
    Posts:
    5,428
    Likes Received:
    0
    Cheers dude! Yep just buy one:thumbs:
     
  5. EDnovaStarlet

    EDnovaStarlet RWD Carless

    Joined:
    Nov 8, 2005
    Posts:
    1,083
    Likes Received:
    0
    yeah I'm using 255's pilot sport's and their far too super grippy for skidding lol
     
  6. driftescort

    driftescort Active Member

    Joined:
    May 19, 2005
    Posts:
    5,428
    Likes Received:
    0
    Hopefully should be starting this today, decided to fit the HKS turbo and GTR injectors. It all went together pretty sweet with a bit of a hand from some of lads (Steve and Bill:thumbs:).

    I think it should run reasonably well with the standard ECU and AFM but have just ordered a Innovate LC-1 and am gonna get a nistune ordered up and fitted and if I can might give a go at mapping it myself!

    We will see how it goes:D
     
  7. driftescort

    driftescort Active Member

    Joined:
    May 19, 2005
    Posts:
    5,428
    Likes Received:
    0
    Well I got it up and running today. Was delighted when it started first turn of the key. It is running ok with the fuel pressure turned down a bit but will need a map soon.
     
  8. driftescort

    driftescort Active Member

    Joined:
    May 19, 2005
    Posts:
    5,428
    Likes Received:
    0
    Update: And first off no pics at the min, so sorry about that! Probably wouldnt be that intresting anyway!

    So I got a few more bits and pieces to get it ready to be mapped. Got a Z32 AFM that went on pretty straight foward, also got a Blitz Dual Solenoid boost controller and got that banged on.

    Got myself a second hand DW wasted spark kit, it came pre-wired but the wiring was terrible (scotchlocks:wack:) so re-wired that and got it fitted.

    All seems to be running well now, obviously needs a map but my nistune board has finally arrived and hopefully it will be getting mapped on monday if everything goes my way:D
     
  9. Mattolodis

    Mattolodis Active Member

    Joined:
    Jul 28, 2007
    Posts:
    2,913
    Likes Received:
    0
    Cool stuff matey sounds like the parts are coming together keep us updated
     
  10. driftescort

    driftescort Active Member

    Joined:
    May 19, 2005
    Posts:
    5,428
    Likes Received:
    0
    Well after a terrible time at the dyno which resulted in the car returning home still un-mapped I had a think about what I wanted from the car.

    I am not exactly flush with money at the moment and cant really afford to spend all this money on a car I have to trailer everywhere and can only use in comps.

    So yesterday I picked this up:

    [​IMG]

    It is a mint shell with full interior and NCT (MOT). Basically what I'm gonna do is re-shell my drift car into this and have a pretty well specced road car that with a few mods like seat, harness, bolt-in cage, I can still do a few drift days and comps in if I can afford to.

    Going to get cracking on it in the next couple of days, hopefully it shudn't take too long:D
     
  11. driftescort

    driftescort Active Member

    Joined:
    May 19, 2005
    Posts:
    5,428
    Likes Received:
    0
    Going to get going on this tomorrow, cant wait to get stuck in!

    Going to start stripping the drift car.

    Anyone intrested in a Pro-spec very clean registered R32 shell?
     
  12. fesoj

    fesoj Active Member

    Joined:
    Nov 28, 2006
    Posts:
    1,226
    Likes Received:
    0
    ahh, i did exactly the same thing as this, and now i have a car otr and a shell, which i was going to sell, but have decided to build another 32 out of, but with an rb25 instead...
    it must be infectious

    GLWB mate, enjoy the ownership of a nissan!
     
  13. driftescort

    driftescort Active Member

    Joined:
    May 19, 2005
    Posts:
    5,428
    Likes Received:
    0
    Cheers mate:thumbs:
     
  14. driftescort

    driftescort Active Member

    Joined:
    May 19, 2005
    Posts:
    5,428
    Likes Received:
    0
    Right got the drift car on the lift today and with a little help from the lads, in about 2.5 hours it looked like this:

    [​IMG]

    Stripped and just in case you were wondering because of the crap pic I took, that is the back axle in the backround.

    Got the new shell on the lift ready to go at it again tomorrow, If it all goes well we might even have it running.
     
  15. driftescort

    driftescort Active Member

    Joined:
    May 19, 2005
    Posts:
    5,428
    Likes Received:
    0
    It is up and running and driving now, seems to be running well but needs to be mapped.

    I am pretty happy though as the boost and fuel problems I was having in the old car seem to be gone.:D
     
  16. driftescort

    driftescort Active Member

    Joined:
    May 19, 2005
    Posts:
    5,428
    Likes Received:
    0
    So this is how its sitting at the moment, Just got some old 18s I had laying around on it at the moment just to have it driving around the yard.

    [​IMG]

    So I am going to use the bonnet and bumper off my drift car as it didn't come with these and I don't really have the money for anything flash at the moment. I have to get them prepared for paint but I am liking the look of the GTR front end on some of the cars I have been looking at recentley, so this got me thinking. My front bumper is a GTR replica item so that would do for a bit,I wanted a bonnet but can't really afford it so after a quick discussion with my freind Bill (Top Fabricator!) We decided to do this

    [​IMG]

    Followed by this, (Sorry about the thumb!)

    [​IMG]

    Which it left it looking a bit like this,

    [​IMG]

    and this fitted,

    [​IMG]

    Im pretty as I think it turned out Well. Just needs a light skim of filler now and to be painted.

    Also does anyone know what spoiler is fitted to the car? Is it a GTR one or something else? It has a brake light fitted to it.

    [​IMG]

    [​IMG]

    I was thinking of removing it but I think it is growing on me.
     
  17. LTM

    LTM Member

    Joined:
    Jan 19, 2006
    Posts:
    699
    Likes Received:
    0
    I have a grinder spec bonnet too.:wack:
    um.. isnt it just a gtst spoiler?
     
  18. driftescort

    driftescort Active Member

    Joined:
    May 19, 2005
    Posts:
    5,428
    Likes Received:
    0
    Grinder spec bonnet FTW!

    Ya maybe it is just a GTST one, I wasn't sure. Brake light works and everything:thumbs:
     
  19. driftescort

    driftescort Active Member

    Joined:
    May 19, 2005
    Posts:
    5,428
    Likes Received:
    0
    Got a bit of time to go at the car again today, Got my drivers Sparco Pro2000 Kevlar seat fitted, needs a good clean.

    [​IMG]

    Was a bit of a mission as I was using a Bride rail and it would seem they don't like fatboy European spec Sparcos:wack: Got it sorted in the end though!
     
  20. PHIL-BLR

    PHIL-BLR Member

    Joined:
    Oct 18, 2009
    Posts:
    547
    Likes Received:
    1
    doing a great job mate mine is taking forever wish i just stuck a another sr in an got some seat time liking the r32's would love one for a road car

    what ecu did you go for an who done the mapping?
     

Share This Page