Breaking this car. Contact no. 07827 899 680 http://www.driftworks.com/forum/drift-car-projects-builds/130288-ps13-4a-no-bodge-job-here.html PS13.4A Shell. Comes as pictures less wheels and clear fronts. (replaced with orange) The shell comes with. Origin Roof spoiler Supermade genuine rear bumper. Magic Aero Chuki skirts Blended in front bumper with SRB splitter Blended in 50mm Takadasi Rear overfenders Full respray in Daytona Pearl Grey inside shell sprayed gloss black Custom wings so the conversion is seamless. Full dash dodger cage. Tracker Horizon Clifford Concept 650Mk11 Clear side indicators Headlights with 4.3k xenon and 6k main beam Rear lights crystal clears. Full Interior Less front seats and seatbelts. Battery relocated to the boot with AGM stop start battery (fully sealed high ampage battery) RCA and speaker cables already run from Hu to boot. The shell has been sound deadened and insulated and sheeps wool in the nooks. its very quiet and very comfy 5 Studs Hubs Polybushed very free spinning. front and rear braided brake lines Hydro handbrake R32 Discs all round (no calipers) Front and rear lower arms with brand new bushes and brand new Roll Centre correction balljoints. Brand new track rod ends Z32 track rods Polybushed steering rack All greddy gauges and senders GTR fuel pump Metal steering rack bush JBL front and rear speakers. All speaker and rca cabling to boot ready for amps and subs Amp/sub board included. The price for this is £2000 on stock suspension and stock alignment arms. The shell is not stripped bare ive just taken the big bits off. Its still got bmc clutch slave all wiring etc...literally just the goodies i have taken off. The ECU/Engine/Diff/Running Gear has all been removed but all wiring remains ie you can literally strip ur S13 that you crashed or is rotten and have this amazing car with your stuff on HKS Coilovers S13 Fitment - £400 Sr gearbox with b and m short shifter. - £160 40mm fan and Rad setup. This thing shifts air. it included top and bottom rad hoses, twin primera fans, 40mm ali rad, Top adapter hose to take the 87/82 fan switch and a temp sender for your gauges, the relay and wiring to run it all. this is a bargain - £130 Greddy Gauges - White face black surround green light - Oil temp/Oil pressure/Water Temp/Boost The boost gauge is 72mm i belive while the others are 52mm All senders and sensors and electronic boxes included. - £200 Nismo Engine Mounts - £100 Power enteprise/HKS Silent exhaust system - Turbo back The elbow is Power enterprise and is very nice and the exhaust is i think HKS but no label? very quiet on normal running and very loud on full chat. i have a vid if required. its 3inch the whole way fits perfect lines up perfect, never leaked once in the 5 years ive had it. few scrapes on the bottom where i was lovely lowwwssss. The rear flange is welded i think so it doesnt rub or catch. will come with all exhaust hangers, most uprated or severel adjustments to get it sitting right - £350
Pics on sxoc of the bits i havnt got time to download them and then upload them to another site as i used tapatalk. Breaking My PS13.4a inc Shell - SR20 Bits lots of em
Intercooler sold. Gauges still for sale atm a i forgot to mention there is a green led out on one of the gauges so either repair it or live with it
Bump. Accepting reasonable offers on bits as ive booked flights to collect the new car....specially exhaust or shell as its in the way Deposit received for coilovers too.
I always thought a PS13 rear end and S14a front end would work well. 1st time i've seen it done and it looks great.
Diff is sold. Suspesion arms have just been paid for. Gauages are all for sale. Make me an offer on the boost gauage but im splitting a lovely set and id rather someone elae went thru the hassel tbh but.make me an offer.
Indeed i do agree. But ive got about 33% more by breaking i recon even doing stupid mates rates. If no1 buys the shell il just buy a battered 13/14 and make it running
Loads ofnpics on sxoc of underside and how it comes. Its onky got a little surface rust whih inwas wire brushing off today. Proper clean.
U comin with a crane? The hubs lower arms and subframe hold little value. And the wheels no value. If ur serious pm me and wel have a chat because i want the shell gone. Its depressing me.
Check sxoc for more pics people. The price is 2k as per description and pics on sxoc. Also comes with free greddy gauges! I keep adding bits to the list as i forget what ive done to the shell.