I am breaking my S13 project - Really struggled to find time for it lately so sadly it all has to go! Listing parts off the top of my head so there'll be more to add down the line. SR20DET Redtop Engine, complete minus turbo. I have a plug and play S13 loom to go with it for UK cars. Engine has been fitted with a metal head gasket and the work was all done by Mitch. I am unsure of the mileage, but it's not been used since buying it from Mitch a couple of years ago. It will come with a stainless, heat wrapped exhaust manifold £1200 CA Gearbox fitted with SR20 bell housing, which fits to above engine £150 Garret GT2871 Turbo. I forget the exhaust housing size, but I bought from here, never been used since purchase, has a couple of very minor "nicks" on the intake fins, nothing to worry about though, but I find with things like this honesty is the best policy. £SOLD S13 Fabricage bolt in roll cage. I'm not 100% sure which spec this is, but it has a rear x, through the dash design A-pillars and door bars. I think its called a 6 point. It's un-painted and ready for u to colour up however you want. Will require need mounting plates as the ones I have are welded in to the shell. £550 KAAZ 2-way diff. I think it's standard ratio for S13. It will be sold in the S13 housing. £450 S13 Black Shell bare shell, all glass, doors and anything else that will remain on the car like fuel tank etc. Great shell, had the rear underside of both sills professionally repaired (Usual rust spots removed and new plate welded in place). It is fitted with the reg 'L7 JYM'. I believe it's a 1994 shell and I bought it as a working car a couple of years back. I have the V5 here also. £No idea how much they sell for these days. The rest of the stuff I have is as follows, but I need to go through it all to add more info and items; Brand new 180sx FMIC kit for redtop Cobra bucket seat in red, Suzuka I believe. Driftworks low mount seat rail drivers side. Part shop max bushed rear sub frame. Full set of adjustable arms for S13 chassis. Skyline R33 GTS-t 4pot/2pot brakes. Set of S13 coilovers, think they're Apex ones. Set of 18" wheels, very rare JDM ones.. XR Longchamps VIP spec. 18 x 9.5 (3" dish) and 18 x 8.5 (2" dish) Very thick copper radiator that fits perfectly into S13, but double the standard width. Has hose positions in place for SR20 swap. Single plate SR20 clutch, I forget the brand, think it's an Exedy. I have a Circuitsports/DMAX (forget which) 1 piece elbow and downpipe available also. Excuse the photo's it was pretty dark and they've come out blurry! The car isn't slammed or anything for build purposes - the wheels would look really good with it slammed imo. There will be more to add, if you're interested in anything of the above just say and i'll get some prices sorted or pics on request.