The time has come for me to upgrade to a more powerful inverter tig so my Cebora TigStar is up for sale. It's a fantastic welder, million times better than any chinese inverter tig and won't blow up like those do either! Welds aluminium very nicely (will upload pics if anyone wants to see) with squarewave allowing very stable arc with no wandering allowing nice neat welds. Great also for thin steel and stainless steel using the pedal. Machine has up and downslope adjustment and post gas adjustment. 2T and 4T trigger options when not using pedal and HF start or scratch start selection switch. The HF start works perfectly. Has original power adjuster included. There really is a massive diference between this welder and your cheaper ebay/chinese units. The machine is still hooked up so is available for any trial to see the difference. These are getting very hard to find and I spent a year after I originally bought the unit just to find a pedal to go with it to get my aluminium end of welds perfect and foot pulsing of stainless. One of these units without pedal sold recently for £680 on ebay. Pedals are available from wilkinson star at around £500 and it's a chinese one (I know, I bought one and sent it straight back despite the picture being of the original one) Features: 160A AC or DC output 240V Single Phase normal 13A plug HF Start Upslope and Downslope Adjustment Post Gas Adjustment Cebora Foot Pedal Included Original Power Control Switch Included Euro Connections for Earth and Torch 8M torch lead (will measure tomorrow) 4M earth lead (will check also) Will supply with gas lens setup for perfect clean welds I'm asking £850 or best offer for this machine. If it gets close to this I'll throw in a regulator and some large tungstens for aluminium welding too.