DW Offsetspacer + spacer?

Thread in 'Technical Questions' started by shirunai, Aug 1, 2013.

  1. shirunai

    shirunai Active Member

    Joined:
    Mar 11, 2005
    Posts:
    1,434
    Likes Received:
    0
    Location:
    ornskoldsvik sweden
    Can you use driftworks offsetspacer with a 5mm spacer? The problem I have the offset spacer hit the rack to early.
    If its max i am really disapointed in my driftworks setup....
     
  2. kam

    kam I've touched Chris Parry

    Joined:
    Apr 10, 2006
    Posts:
    7,566
    Likes Received:
    1
    No, don't use a spacer.

    What is your setup? What are you disapointed with? Steering angle?
     
  3. shirunai

    shirunai Active Member

    Joined:
    Mar 11, 2005
    Posts:
    1,434
    Likes Received:
    0
    Location:
    ornskoldsvik sweden
    Yeah just the angle, rollcenter bit is amazing and the way the car feels over bumps etc so amazing, its the lock i am little worried about. Have a s14 with
    OEM LCA´s extended 26mm (s14 LCA)
    dw geomaster
    dw offsetspacer
    dw R33 kinked tensionrod

    camber -3´50minutes
    Toe in ´10min out
    caster like 7degrees
    and pretty normal rideheight not superlow not superhigh

    [​IMG]

    not near this
    [​IMG]
     
    #3 shirunai, Aug 1, 2013
    Last edited: Aug 1, 2013
  4. kam

    kam I've touched Chris Parry

    Joined:
    Apr 10, 2006
    Posts:
    7,566
    Likes Received:
    1
    How much angle can you achieve?
    What is limiting the lock?

    I'd play around with the caster in your case.

    The S15 had nothing custom, all off the shelf.
     
  5. shirunai

    shirunai Active Member

    Joined:
    Mar 11, 2005
    Posts:
    1,434
    Likes Received:
    0
    Location:
    ornskoldsvik sweden
    The Offset spacer hits the rack, under 60degrees closer to 50-54degrees, nothing accurate to meassure with
     

Share This Page