E36 new skid project

Thread in 'Project Cars and Builds Threads' started by winston, May 20, 2013.

  1. winston

    winston Member

    Joined:
    Sep 4, 2012
    Posts:
    69
    Likes Received:
    0
    Hi I'm new to driftworks my names winston 25 from northants .thought id post my car to start a discussion and get advice etc
    E36 328i coupe
    Decat stainless exhaust system
    Remapped
    M50 Manifold
    Polyurethane ARB bushes front and rear
    Polyurethane lollypop bushes
    Coilovers
    Fan over ride switch
    Uprated rear top mounts
    Camber adjustible front mounts
    Short shift
    Omp strut brace
    Push start
    Custom intake boot
    Induction kit with custom stainless pipe
    CDV delete
    ASC delete




    Current power on Dyno was :

    247.5bhp @6100rpm
    328nm @4000 rpm




    Home made 90 degree silicone intake boot.

    Stainless steel exhaust manifolds installed.

    Car was booked in at the rolling road, after some map tweaks the final result was 198bhp@ the wheels or 247bhp @ flywheel




    Custom air intake
    Air intake temp sensor and display on dash
    Under bonnet temp sensor and display on dash

    Latest mod has been gettin the diff welded buy ant up at santa pod , this has obv helped get it sideways alot . Any advice on set up and skidding a e36 appreciated

    Few pics
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Diff work
    [​IMG]
    M3 evo manifolds mite get rid if anyone's intrested [​IMG]
    New 160mph clocks
    [​IMG]
     
    #1 winston, May 20, 2013
    Last edited: May 22, 2013
  2. Jizzle

    Jizzle Member

    Joined:
    Sep 18, 2012
    Posts:
    194
    Likes Received:
    0
    what manifolds did you end up using mate? stainless jobbies off ebay?

    the car looks really smart, very clean!
     
  3. vdublou94

    vdublou94 Member

    Joined:
    Oct 1, 2012
    Posts:
    315
    Likes Received:
    0
    Saw an E36 exactly like this one the other week, decent car mate!
     
  4. winston

    winston Member

    Joined:
    Sep 4, 2012
    Posts:
    69
    Likes Received:
    0
    Yea stainless mate , the m3 ones need quit a bit fabricating for what wanted . Cheers man I'm happy with it still lots to do :)

    - - - Updated - - -

    Cheers man :)
     
  5. LiamE36

    LiamE36 Active Member

    Joined:
    Sep 25, 2011
    Posts:
    1,525
    Likes Received:
    0
    Looks tidy.
     
  6. winston

    winston Member

    Joined:
    Sep 4, 2012
    Posts:
    69
    Likes Received:
    0
    Cheers man it's getting there
     
  7. donkeystyle

    donkeystyle Member

    Joined:
    Jul 24, 2012
    Posts:
    49
    Likes Received:
    0
    Cars nice man, good work :thumbs: You had any hassle with that front number plate? Where did you get it/size? Always tempted to order a small 'show' plate, never sure what sizes people do/dont get away with though
     
    #7 donkeystyle, May 22, 2013
    Last edited: May 22, 2013
  8. winston

    winston Member

    Joined:
    Sep 4, 2012
    Posts:
    69
    Likes Received:
    0
    Cheers man :) mm the plate is like the size people put on bikes , can get them made at most car shows . They make them while you wait .Never had any hassle for it I think alot of the time if there not looking for it it goes un noticed as being undersized ,if you no wat I mean . I keep the other one in the boot incase I get pulled for it , would probly try talk my way out of it hah . Mm but I think with gettin pulled over in general has alot to do with how you drive most the time . I've ran no plate before for quite awhile with no trouble probly just lucky / foolish , but ithink big plates and to a degree plates in general ruin the look of cars . I take the little one off at events or watever :)

    - - - Updated - - -

    Cheers man :) mm the plate is like the size people put on bikes , can get them made at most car shows . They make them while you wait .Never had any hassle for it I think alot of the time if there not looking for it it goes un noticed as being undersized ,if you no wat I mean . I keep the other one in the boot incase I get pulled for it , would probly try talk my way out of it hah . Mm but I think with gettin pulled over in general iPad alot to do with how you drive most the time . I've ran no plate before for quite awhile with no trouble probly just lucky / foolish , but ithink big plates and to a degree plates in general ruin the look of cars . I take the little one off at events or watever :)
     
  9. winston

    winston Member

    Joined:
    Sep 4, 2012
    Posts:
    69
    Likes Received:
    0
    [​IMG]

    Rotas son :)
     
  10. winston

    winston Member

    Joined:
    Sep 4, 2012
    Posts:
    69
    Likes Received:
    0
    [​IMG]. Bronze
     
    #10 winston, May 22, 2013
    Last edited: May 23, 2013
  11. LiamE36

    LiamE36 Active Member

    Joined:
    Sep 25, 2011
    Posts:
    1,525
    Likes Received:
    0
    Do a skid.
     
  12. winston

    winston Member

    Joined:
    Sep 4, 2012
    Posts:
    69
    Likes Received:
    0
    And in black
    [​IMG]
     
    #12 winston, May 22, 2013
    Last edited: May 23, 2013
  13. winston

    winston Member

    Joined:
    Sep 4, 2012
    Posts:
    69
    Likes Received:
    0
  14. winston

    winston Member

    Joined:
    Sep 4, 2012
    Posts:
    69
    Likes Received:
    0
    Leather seats m3 front and back seats forsale
     
  15. winston

    winston Member

    Joined:
    Sep 4, 2012
    Posts:
    69
    Likes Received:
    0
    [​IMG] tyres purchased
     
  16. winston

    winston Member

    Joined:
    Sep 4, 2012
    Posts:
    69
    Likes Received:
    0
    [​IMG] purchased
     
  17. winston

    winston Member

    Joined:
    Sep 4, 2012
    Posts:
    69
    Likes Received:
    0
    Bought steering wheel , boss and gear knob today aswel ... Seat and harness now
     
  18. blackrx7

    blackrx7 Member

    Joined:
    Mar 30, 2011
    Posts:
    69
    Likes Received:
    0
    Nice car mate
     
  19. dibs

    dibs Member

    Joined:
    Jun 4, 2013
    Posts:
    38
    Likes Received:
    0
    Awesome car dude! Really like the way it looks, the power and the interior as well :D Looks too good to skid! Well done on your project so far.
     
  20. winston

    winston Member

    Joined:
    Sep 4, 2012
    Posts:
    69
    Likes Received:
    0

Share This Page