FC Tuning visit to Holland - Session 3

Thread in 'Technical Questions' started by steve_fctuning, Jan 19, 2010.

  1. steve_fctuning

    steve_fctuning ECU Tuner&Specialist

    Joined:
    May 1, 2007
    Posts:
    1,503
    Likes Received:
    1
    Location:
    London
    To my fellow Dutchman :smash::smash::smash:

    Just to let you all know ill be back over in Holland at the end of Feb :)

    This tuning session will be taking place once again at DP Engineering, in Holland. The setup is excellent, They are well equipped & their cooling system is possibly one of the best in Europe, If not THE BEST ive seen out of the dyno's ive used in a loooooong time ;) :thumbs:

    So with that, combined with an excellent DynaPack Hub Dyno, you can be sure of excellent cooling simulation condition whilst Im engine mapping and NO SLIP at ALL being a Hub dyno (im also able to steady state tune properly BIG turbo setups using this type of dyno system)

    DP-Engineering
    St. Teunismolenweg 50 E
    6534 AG
    Nijmegen
    The Netherlands
    DP-engineering

    For those of you based in Europe that don't know, whether your a Drifter, Drag Racer, Track Go-er, Street Driver - DP-Engineering is a company specialise in designing, fabricating and tuning complete turbocharger systems and associated products for predominantly mainly, Citroën and Peugeot engines.

    'Dave and Pete' are top guys with whom im now good friends with. So naturally I choose to host my FCTuning European Sessions @ 'DP Engineering'

    Now to all my Euro folk, newbies, this Session DOES fill up quick and already ive had 2/3 takers out of a maximum 4/5 cars that ill be proudly providing FCTuningNistune Solutions too as well as programming any other aftermarket ecu systems (named list to follow)

    So if your seriously interested in getting your engine/ecu mapping properly set up on the dyno for the 2010 Season and achieving the maximum driveability from your car then please contact me

    I'm also sure that Dave and Pete will also welcome any Power Runs too for people wanting to just check their fuelling and timing setups

    Previous reviews on the 2 previous sessions can be read in my Testimonials Section (again, kindly posted by McClarenBoy)

    I will also post a gallery link to pics & footage from Sessions 1 & 2 shortly.

    Full Details in Dutch can be found here :wave:
    FC Tuning komt naar Nijmegen (derde keer) - laatste weekend van februari

    also here
    Board Bericht

    Special Thanks to DriftWorks Member 'McClarenBoy' for the translation (as my dutch is about as good my french - non existant :D )

    If you have any questions relating to this session then by all means PM me or post them on this thread

    Cheers :smokin:
     
    #1 steve_fctuning, Jan 19, 2010
    Last edited: Feb 10, 2010
  2. steve_fctuning

    steve_fctuning ECU Tuner&Specialist

    Joined:
    May 1, 2007
    Posts:
    1,503
    Likes Received:
    1
    Location:
    London
    1/ Tom van Lieverlooy - FCTuningNistune ECU Solution
    2/ Rutger Sluyters - FCTuningNistune ECU Solution
    3/
    4/
    5/
     
  3. McLarenboy

    McLarenboy Member

    Joined:
    Oct 8, 2007
    Posts:
    449
    Likes Received:
    0
    Location:
    Belgium
    date is set - final weekend of february
     
  4. steve_fctuning

    steve_fctuning ECU Tuner&Specialist

    Joined:
    May 1, 2007
    Posts:
    1,503
    Likes Received:
    1
    Location:
    London
    Saturday the 27th February, 2010 - 09:30hrs
     
  5. poison-neo

    poison-neo Member

    Joined:
    Aug 5, 2009
    Posts:
    33
    Likes Received:
    0
    1/ Tom van Lieverlooy - FCTuningNistune ECU Solution
    2/ Rutger Sluyters - FCTuningNistune ECU Solution
    3/ ---
    4/
    5/
     
    #5 poison-neo, Jan 29, 2010
    Last edited: Feb 17, 2010
  6. Bean Bandit

    Bean Bandit Swiss quality

    Joined:
    Jun 3, 2005
    Posts:
    683
    Likes Received:
    0
    Location:
    Khartoum/Sudan - Switzerland
    damit too early :( - anyway can you send me a PM with a ballpark figure for mapping my AE86 running on MegaSquirt II Extra (Megatune or TunerStudio)?
     
  7. steve_fctuning

    steve_fctuning ECU Tuner&Specialist

    Joined:
    May 1, 2007
    Posts:
    1,503
    Likes Received:
    1
    Location:
    London
    Bean Bandit

    PM Sent mate, dont worry there will be other times, (basically the following month, late on in)


    Poison

    I think i found some 740's lying around at home dude (ya in luck) though as always I advise them being cleaned so im sending them off Monday morning for Ultrasonic Cleaning - PM me for full details putting INJECTORS in the subject heading

    Cheers
     
  8. boost_ego

    boost_ego New Member

    Joined:
    Oct 11, 2005
    Posts:
    21
    Likes Received:
    0
    1/ Tom van Lieverlooy - FCTuningNistune ECU Solution
    2/ Rutger Sluyters - FCTuningNistune ECU Solution
    3/ Mirek Duda - Nistune (provided that I can get some reasonable priced 740cc inj. till then)
    4/Antonis Antopoulos - Nistune
    5/
     
  9. NismoDani

    NismoDani New Member

    Joined:
    Feb 15, 2010
    Posts:
    3
    Likes Received:
    0
    1/ Tom van Lieverlooy - FCTuningNistune ECU Solution
    2/ Rutger Sluyters - FCTuningNistune ECU Solution
    3/ Mirek Duda - Nistune (provided that I can get some reasonable priced 740cc inj. till then)
    4/Antonis Antopoulos - Nistune
    5/ d'Angelo Nivillac - FCTuningNistune ECU Solution
    6/
     
    #9 NismoDani, Feb 15, 2010
    Last edited: Feb 16, 2010
  10. steve_fctuning

    steve_fctuning ECU Tuner&Specialist

    Joined:
    May 1, 2007
    Posts:
    1,503
    Likes Received:
    1
    Location:
    London
    Welcome to DW Nismo Dani :)

    Dont forget to introduce yourself to the masses

    Looking forward to putting name to face with all the new DW European folk and help you out where I can :thumbs:
     
  11. poison-neo

    poison-neo Member

    Joined:
    Aug 5, 2009
    Posts:
    33
    Likes Received:
    0
    unfortunately I am out :(

    1/ Tom van Lieverlooy - FCTuningNistune ECU Solution
    2/ Rutger Sluyters - FCTuningNistune ECU Solution
    3/ Antonis Antopoulos - Nistune
    4/ d'Angelo Nivillac - FCTuningNistune ECU Solution
    5/
     
  12. steve_fctuning

    steve_fctuning ECU Tuner&Specialist

    Joined:
    May 1, 2007
    Posts:
    1,503
    Likes Received:
    1
    Location:
    London
    1/ Tom van Lieverlooy - FCTuningNistune ECU Solution
    2/ Rutger Sluyters - FCTuningNistune ECU Solution
    3/ Antonis Antopoulos - FCTuningNistune ECU Solution
    4/ d'Angelo Nivillac - FCTuningNistune ECU Solution
    5/ Migske - Apexi Power FC


    SESSION NOW FULL
     
    #12 steve_fctuning, Feb 19, 2010
    Last edited: Feb 19, 2010
  13. poison-neo

    poison-neo Member

    Joined:
    Aug 5, 2009
    Posts:
    33
    Likes Received:
    0
    1/ Tom van Lieverlooy - FCTuningNistune ECU Solution
    2/ Rutger Sluyters - FCTuningNistune ECU Solution
    3/ Antonis Antopoulos - FCTuningNistune ECU Solution
    4/ d'Angelo Nivillac - FCTuningNistune ECU Solution
    5/ Migske - Apexi Power FC
    SESSION NOW FULL

    luckily I could get my car repaired faster than I thought.
    just in case anybody would have to cancel I will gladly fill in.

    subs bench:
    6/ Mirek Duda - NisTune
     
  14. McLarenboy

    McLarenboy Member

    Joined:
    Oct 8, 2007
    Posts:
    449
    Likes Received:
    0
    Location:
    Belgium
    srry Mirek - but it's unlikely anyone will cancel because of the deposit each participant paid.
     
  15. steve_fctuning

    steve_fctuning ECU Tuner&Specialist

    Joined:
    May 1, 2007
    Posts:
    1,503
    Likes Received:
    1
    Location:
    London
    Yep, session is all full, if anyone drops out (which I doubt as they've made a deposit) then I will call you well in advance to drive up tomorrow morning

    So have your mobile on until further notice
     
  16. poison-neo

    poison-neo Member

    Joined:
    Aug 5, 2009
    Posts:
    33
    Likes Received:
    0
    what a thrilling day... :smokin:

    first of all: thanks to the guys from dp, to steve and of course McLarenboy !!!


    it was really impressive seeing steve doing his magic.
    thanks to my shitty clutch i'll have to come back,
    but still got a lot of work done on my car and finally got to know you guys.

    just a few days ago I was just reading all the miracle-stories about steve's mapping
    session and now, after being part of one I can just say:

    yes, it's all true, if anybody ever needs her/his car mapped,
    steve is the man for the job :thumbs:
     
  17. steve_fctuning

    steve_fctuning ECU Tuner&Specialist

    Joined:
    May 1, 2007
    Posts:
    1,503
    Likes Received:
    1
    Location:
    London
    Feedback From Session 3

    Poison,

    It was great to meet you also

    Im already speaking with DP Engineering this morning and together we are just going over each other calendars

    It is looking like the last weekend of April when Ill be making another visit ;) so you've plenty of time to prep and prepare ;)

    I will be starting a new thread this afternoon with all the information, dates n times etc etc

    I hope you enjoyed the day (shame about your clutch not holding the torque - I was gutted for you) ;) - but next time ill get you in as the first participant

    For many of you I could sense it was a first time experience so I hope that it wasn't tooooo nerve racking for you all, :D listening to your engines being spun @ up to 7200rpm on the spot ( the looks on some of your faces had me smiling inside)

    I hope also that you were pleased with your result, your engines performance after the tune, the improved drivability after, the test drive and general handling of everything from initial correspondence up until now :)

    As I always say, chill out about the figures, Its really how well the engine and car performs on the road (its always hard to grasp this until you've had an engine set up properly)

    Please make your comments by clicking H E R E please - Cheers Guys and great to meet you all :thumbs:


    Thanks and no doubt Ill be seeing all again very soon :dw:
     
  18. steve_fctuning

    steve_fctuning ECU Tuner&Specialist

    Joined:
    May 1, 2007
    Posts:
    1,503
    Likes Received:
    1
    Location:
    London
    Photos from Session 3

    If you took pics with your cam please let me know and ill forward and email link for you to send them to and they will get automatically uploaded to the gallery for the days events

    Cheers

    MobileMe Gallery
     
    #18 steve_fctuning, Mar 1, 2010
    Last edited: Mar 1, 2010

Share This Page