Wanted GT2560R (bb) turbine housing

Thread in 'Parts for sale' started by jiri.l, May 21, 2015.

  1. jiri.l

    jiri.l New Member

    Joined:
    Aug 14, 2014
    Posts:
    16
    Likes Received:
    0
    Afternoon everyone,

    I am looking for a turbine (exhaust) housing off a Garrett GT2560R (ball bearing).
    Must be in good condition, no cracks around wastegate port.

    This should be the spec:

    Wheel diameter: 53mm
    Trim: 62
    A/R: 0.64

    Can collect around Aberdeen area or would need it posted, will pay by paypal!

    Thank you guys,
    Jiri
     
  2. jiri.l

    jiri.l New Member

    Joined:
    Aug 14, 2014
    Posts:
    16
    Likes Received:
    0
    Anyone any ideas?
     
  3. SheffJohn

    SheffJohn Member

    Joined:
    Sep 28, 2011
    Posts:
    358
    Likes Received:
    2
    Location:
    Sheffield
    Is that the full code for a gt28rs ?
    If it is ive got one with a collapsed centre bearing assembley, can check condition of exhaust side if it will suit ?
     
  4. jiri.l

    jiri.l New Member

    Joined:
    Aug 14, 2014
    Posts:
    16
    Likes Received:
    0
    Hi mate, I believe you guys call it a T28R so yours would have a bigger exhaust housing maybe? There should be a code on the housing if you could check? Thanks mate!
     
  5. SheffJohn

    SheffJohn Member

    Joined:
    Sep 28, 2011
    Posts:
    358
    Likes Received:
    2
    Location:
    Sheffield
    I'll have a look for numbers
     
  6. SheffJohn

    SheffJohn Member

    Joined:
    Sep 28, 2011
    Posts:
    358
    Likes Received:
    2
    Location:
    Sheffield
    Sorry about delay, one of lads has got it as he's stolen the coldside housing

    Numbers off the cast hot side he can see are:
    449010-1
    64 m3
    78 h mk

    See if they match ?
     

Share This Page