Huge spec 1JZ S15 breaking - Bride/Volk/Holset/R154/Exedy/Spec R Aero

Thread in 'Parts for sale' started by chopaholic, May 3, 2015.

  1. chopaholic

    chopaholic Well-Known Member

    Joined:
    Jan 23, 2009
    Posts:
    1,724
    Likes Received:
    39
    It pains me to do this but unfortunately after the 1JZ engine starting to rattle yesterday I have decided to break my 1JZ S15. I have spent two years slowly building the car and unfortunately now have lost heart and want to go back to owning a 180sx which I care less about and don’t mind pranging off walls.

    Please note, the car is still whole and driving and will not be stripped until 2 weeks’ time (due to work commitments). Once the car has been stripped the items that have not had a deposit placed on them will be photographed.

    All prices are collected from Northern Ireland, however I can arrange postage at buyer’s expense, all items will be wrapped correctly or large items can be put on a pallet for collection.

    Deposit/full payment can be taken on all items and upon removing them from the car they will be posted out. Please note I offer NO refund on the deposits placed, I do not want my time wasted.

    Please no silly offers. All payments/deposits by Paypal with fees covered or as gift.

    The car is currently sitting as pictured.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    S15 Shell – Headlights, tail lights, full interior bar seats/steering wheel, bonnet, doors, all glass, mint underneath, has a modified slam panel for the 1JZ swap but can include the original section to be put back in, Car was previously in the South of Ireland so has had VRT paid, in the UK its MOT’d until January 2016 – Decent offers please.

    R154 Gearbox – Good condition with smooth changes, always ran with fresh oil. Bare box. £900

    Exedy Single Stage, Clutch, Flywheel and pressure plate - £250

    Will do the gearbox, bellhousing, clutch and shifter as a package for - £1370

    1JZ > Sbody prop shaft, welded and balanced by Richard Bradley - £100

    2JZ/1JZ Alternator, was bought as a reconditioned unit only 4 months ago - £80

    1JZ GTE Soarer Auto ECU – £80

    1JZ > Sbody conversion mounts, Engine & Gearbox - £100

    Full JZ Sbody HKS Hi Power exhaust system, including silencer, Tig welded together to fit, has some scrape marks in the mid-section where the car was running low - £200

    1JZ Front sump, some light marks from running low, needs a new bung bolt - £250

    S14/S15 adjustable rear arm set - £100

    S14/S15 Subframe with solid driftworks bushes - £80

    Skyline R33 braided brake lines front and rear - £40

    S15 Spec R Aero skirts, genuine plastic, good condition - £300

    S15 Spec R rear bumper with Aero spats, genuine plastic, good condition - £300

    HKS Turbo timer - £25

    Volk GTC 18x10 ET–2 18x9 ET0, some marks on the lips but overall in good condition, no bends or buckles, come with two brand new tyres on front and worn ones on the rear. These are very aggressive and rare - £1350

    Bride Vios Low Max, Kevlar backed, pair, both in very good condition, comes with universal rails - £550

    Bride super low driver side rail, side mount – £130

    Kaaz 2way diff - Comes bare, needs casing and shafts. - £250

    Skyline R33 brake set up, with handbrake. Drilled and grooved discs, meaty pads. - £400 (Relisted due to no show)

    Daiyama coilovers, all good condition and were almost new when I put them in - £300 (Relisted due to no show)

    Please private message me if you are interested in parts.

    Thanks

    Dylan.

    Sold/Deposit items below:

    AEM Air/Fuel ration kit, everything included, 5 months old - DEPOSIT TAKEN.

    Blitz old school boost controller, hi/low boost with scramble boost, everything present including all wiring - SOLD

    Origin front over fenders, genuine origin purchased from Japan - SOLD

    Origin rear over fenders, genuine origin purchased from Japan - SOLD

    Origin rear roof spoiler, genuine origin purchased from Japan - SOLD

    Defi style oil temp gauge - DEPOSIT TAKEN

    Defi style oil pressure gauge - DEPOSIT TAKEN

    Defi style water temp gauge - DEPOSIT TAKEN

    Defi style RPM gauge - DEPOSIT TAKEN

    S15 Spec R Aero front bumper, genuine plastic, has had repair work from being damaged before, front lower lip still has some minor marks and a small graze on passenger side from touching kerb - SOLD

    Holset HY35 Turbo, 2.5” outlet, internal wastegate has been TIG welded shut, comes with lines to fit 1JZ, the correct restrictor and fittings. Has been ran on my car for less than 4000 miles - DEPOSIT TAKEN.

    1JZ Toyosport Single turbo manifold, has had the wastegate position modified to clear an Sbody steering rack, also has a strength bar added. Can include new gasket - DEPOSIT TAKEN.

    50mm Wastegate – fits the above manifold via Vband. - DEPOSIT TAKEN.

    R154 extended shifter (custom made) all high quality TIG welded - SOLD.

    50mm Rad modified to fit a JZ Sbody, all TIG welded - SOLD.

    Turbo 2.5” > 3” 1JZ Exhaust downpipe, with flanges for AFM and Lambda, clears steering knuckle - DEPOSIT TAKEN.

    R154 > 1JZ Bellhousing - Prov Sold.

    Front Mount Intercooler - SOLD
     
    #1 chopaholic, May 3, 2015
    Last edited: Jun 29, 2015
  2. pharmed

    pharmed Member

    Joined:
    Nov 12, 2014
    Posts:
    252
    Likes Received:
    0
    Pm'd you
     
  3. Ruishy1

    Ruishy1 Active Member

    Joined:
    May 30, 2010
    Posts:
    3,739
    Likes Received:
    0
    300 quid for the HY35 ?
     
  4. lewyS14a

    lewyS14a Active Member

    Joined:
    Oct 9, 2009
    Posts:
    1,405
    Likes Received:
    14
    Shoot me a price over for rolling shell dude , all the body work bumpers etc i have my own coilovers , wheels and don't need brakes though cheers
     
  5. pharmed

    pharmed Member

    Joined:
    Nov 12, 2014
    Posts:
    252
    Likes Received:
    0
    Think (hope) my pm got first dibs on the single turbo setup
     
  6. shelbz S14A

    shelbz S14A Active Member

    Joined:
    Dec 26, 2008
    Posts:
    4,080
    Likes Received:
    0
    Pm'ed you bud
     
  7. Ruishy1

    Ruishy1 Active Member

    Joined:
    May 30, 2010
    Posts:
    3,739
    Likes Received:
    0
    yeah it did mate :)
     
  8. kev200sx

    kev200sx Member

    Joined:
    Aug 7, 2010
    Posts:
    248
    Likes Received:
    1
    What diff is in it? How much?
     
  9. chopaholic

    chopaholic Well-Known Member

    Joined:
    Jan 23, 2009
    Posts:
    1,724
    Likes Received:
    39
    Deposit taken on the Turbo, manifold, wastegate and AEM A/F.
     
  10. pharmed

    pharmed Member

    Joined:
    Nov 12, 2014
    Posts:
    252
    Likes Received:
    0
    and downpipe ;-)
     
  11. Robert

    Robert Member

    Joined:
    Sep 12, 2008
    Posts:
    882
    Likes Received:
    0
    Pmd about rear spoiler.
     
  12. -jamie-

    -jamie- StrongFlex UK

    Joined:
    Jun 24, 2010
    Posts:
    1,388
    Likes Received:
    1
    Blimey, no deals to be had here :/
     
  13. chopaholic

    chopaholic Well-Known Member

    Joined:
    Jan 23, 2009
    Posts:
    1,724
    Likes Received:
    39
    I don't understand?
     
  14. -jamie-

    -jamie- StrongFlex UK

    Joined:
    Jun 24, 2010
    Posts:
    1,388
    Likes Received:
    1
    Asking strong money for pretty much everything.
    Shame your breaking it though, looked clean
     
  15. chopaholic

    chopaholic Well-Known Member

    Joined:
    Jan 23, 2009
    Posts:
    1,724
    Likes Received:
    39
    Well unfortunately that is the going rate for most things now? And that is what I have paid for most of them.

    Would you rather I sold everything cheap so you can get a good deal? :/
     
  16. trebor69

    trebor69 Member

    Joined:
    Jun 18, 2014
    Posts:
    176
    Likes Received:
    5
    What's the diameter of the oil pressure gauge and whats needed to set it up?
     
  17. s15stuart

    s15stuart New Member

    Joined:
    May 4, 2015
    Posts:
    5
    Likes Received:
    0
  18. Ollie

    Ollie LOOSE!

    Joined:
    Apr 14, 2010
    Posts:
    1,696
    Likes Received:
    3
    Two years building and you would rather break than change a bottom end? Seems like madness to me.
     
  19. chopaholic

    chopaholic Well-Known Member

    Joined:
    Jan 23, 2009
    Posts:
    1,724
    Likes Received:
    39
    I don't have the money to replace the bottom end with my current situation, plus I want another 180sx and could do with freeing up some money from the S15. Not really madness.
     
  20. lewyS14a

    lewyS14a Active Member

    Joined:
    Oct 9, 2009
    Posts:
    1,405
    Likes Received:
    14
    Did you see my post dude ?
     

Share This Page