For Sale IDC/BDC Full Pro 2JZ R32 Skyline (dogbox, work wheels etc)

Thread in 'Drift cars for sale' started by Trixta, Aug 27, 2018.

  1. Trixta

    Trixta Member

    Joined:
    Jul 31, 2007
    Posts:
    498
    Likes Received:
    3
    Location:
    Kildare, Ireland
    !!!!!!!! FOR SALE !!!!!!!!!
    My 2JZ R32 IDC/BDC/Drift Masters High Level Drift Comp Car

    36436180_1848135045252739_2848795242717511680_o_1.

    Spec:
    R32 Skyline
    2JZGTE
    Borgwarner EFR Twinscroll Internally Wastegated Turbo (EFR8374 0.92 T4)
    Inlet Plenum
    1000cc Injectors
    Motamec Oil cooler
    Intercooler with custom straight piping
    G4 Storm Ecu
    AVCR Boost Controller
    Full custom WCP Exhaust Manifold and exhaust system
    Wasted spark kit coil unit
    Mondeo electric fans (excellent cooling, never gets too hot)
    Astra Power Steering setup with capacitor installed to eliminate steering lag

    Mapped to 520 bhp at just 1.1 bar by West Coast Performance
    Turbo setup capable of 600-700 bhp.
    Upping the boost to 1.2, 1.3 bar etc will give you plenty more power very safely. I haven’t as I just find that 520bhp is more than enough, and the response of the Borgwarner turbo setup is too awesome to describe. Literally no lag or clutch kicking needed!

    Tex racing T101A 4 Speed Dogbox (a G force essentially)
    ACT Triple Plate Clutch and ACT Lightweight Flywheel (this setup is 2.5k alone at the start of the season!)
    Tilton hydraulic release bearing
    R32 GTR 4.1 Rear diff and shafts (setup by Mike Deane of DeaneMSport)

    S14 rear subframe
    BC Racing coilovers
    Full GKTech Front Super Lock setup (knuckles, 1-piece lower arms etc)
    GKTech Rear Knuckles and full Japspeed rear adjustable arms
    External fuel cell, swirl pot, 2x fuel pump etc.
    Stone Motorsport cage, and MotorsportFifty6 tubed front and rear.

    2x Work Meister S1R 18x9 et 20
    4x Work Meister S1R 18x10 et -5
    2x Work Equip 01s 18x 10.5 (not exact sure of offset off hand).

    Knight Racer Nismo style full carbon bonnet
    Knight Racer BN Sports style front bumper and sideskirts
    Knight Racer BN Sports style front wings
    Knight Racer BN sports style roof spoiler
    Knight Racer D-Max canards
    TH Components Rear Overfenders
    TH Components Side Skirt extensions
    Custom drag wing
    Polycarbonate Windows

    Plumbed in fire extinguisher, kill switches etc
    GKTech hydro and steering wheel
    Takata 4 Point Harness
    Recaro SPG bucket seat
    Digital dash displaying RPM, oil pressure, temps etc.

    We did a full shell up rebuild at the start of the season and re-wire, and it has been fully painted inside and out in metal flake paint awesomeness! Inside is all black with red metal flake, with the roof being the same. Outside and engine bay is wine with mulit-colour flake and red flake. It will come with some cosmetic damage after 5 rounds of competition, but nothing that can't be tidied up quite easily.

    I’m sure there is tons more I can’t think of. Basically, it is a fully pro spec car, for a fraction of the price it would cost to assemble even half the parts. This is a an extremely competitive, ultra-reliable, and one of the coolest high-level competition cars out there in my opinion, with 8x proper Work Wheels etc. It is a fully hop in and drive package, with some spares thrown in for good measure .

    Price is 22,000 Euro ONO all included, which includes bits and pieces of spare R32 parts and panels I have around the place also.

    Car will be for sale after the last round of IDC at Japfest (end of September), and any potential buyers are welcome to come check it out at the event and see just how good it is, and how reliable etc it is.

    No stupid offers please, as if it doesn't sell I am happy to keep either. Will consider P/X on a good SR20 setup possibly. If people want to buy for cheaper without wheels, without dogbox etc then may consider also.

    IMG_20180705_195756_317.
    IMG_20180705_195756_324.
    IMG_20180707_205650_956.
    30167392_1756473924413622_5729587919368439235_o.
    30072749_1755412454519769_5130521005882235667_o.
    30709878_10156297034474350_8625531963849048064_n.
    30741399_10156297034839350_1559273226679353344_n.
    30728552_10156297035349350_5015272627669827584_n.
    30742421_1765168400216071_8743539669230157824_o.
     
    • Like Like x 3
  2. StenderNL

    StenderNL Member

    Joined:
    Jun 3, 2014
    Posts:
    113
    Likes Received:
    0
    what would be the price without full running gear?
    no engine/ box.
     
  3. Trixta

    Trixta Member

    Joined:
    Jul 31, 2007
    Posts:
    498
    Likes Received:
    3
    Location:
    Kildare, Ireland
    Hey man, wouldn't really have any interest in breaking any of it tbh, and I actually don't currently plan on selling it now either as plans have changes, unless somebody does come in with a full offer then I may re consider of course!
     
  4. StenderNL

    StenderNL Member

    Joined:
    Jun 3, 2014
    Posts:
    113
    Likes Received:
    0
    ahhhhhh to bad man!! love the car!
    i allready have a chevy 6.6 smallbock, plan was to fit it in a BMW 1series.
    i really want to start in the 2019 season so looking for a comp ready car without an engine haha.
    just fit the engine and run
     
  5. kdrifter

    kdrifter New Member

    Joined:
    Oct 23, 2018
    Posts:
    3
    Likes Received:
    0
    Location:
    korea
    Are you still selling? If so, tell me your email address.
     
  6. light-r

    light-r Member

    Joined:
    Apr 1, 2008
    Posts:
    385
    Likes Received:
    3
    Very tempted by this.
    Not enough funds atm, though.
    Congratulations for the build!
     

Share This Page