Oem ECU Remaps / Loom builder Specialist

Thread in 'Misc for sale' started by Slippywheel, Mar 1, 2018.

  1. Slippywheel

    Slippywheel New Member

    Joined:
    Sep 11, 2017
    Posts:
    4
    Likes Received:
    0
    Location:
    Crawley
    Hi guys ,

    I have 4 years of experience making mil-spec to economy wiring looms for road cars, track and race cars .
    Ive wired in PECTEL Sq6m's , SQ6 , countless Ecumaster emus's , DTA's and Motec M100 and PDM'S. I can send you more details and pictures of some of my work should my services be of interest to you. Also done a number of BMW S54 Engine looms and E46 M3 chassis Looms.

    I also do performance and blue optimize maps for road cars offering increases in bhp / torque / smooth throttle response . prices starting at £200


    You can reach my on my mobile number 07850549986

    or

    Email : Slippywheel@gmail.com


    Best Regards

    Emu Install.

    Volvo Remap.JPG

    Evo 6 Wiring Install.
     
  2. r3k1355

    r3k1355 Well-Known Member

    Joined:
    Nov 8, 2007
    Posts:
    3,311
    Likes Received:
    124
    If you offer wiring services/products then one thing thats often popular is a conversion loom that allows the use of VAG coilpacks on the SR and CA engines.
    The stock coilpacks are now very old, replacements (aftermarket or OEM) are very expensive, whereas VAG coils are cheap as chips.

    A few people have made some of these looms before, but they've only done small batches of them.
     
  3. Slippywheel

    Slippywheel New Member

    Joined:
    Sep 11, 2017
    Posts:
    4
    Likes Received:
    0
    Location:
    Crawley

    Thanks for the info . May look at it if i have anyone for 1 first :-)
     
  4. eskimo_god

    eskimo_god Member

    Joined:
    Sep 29, 2007
    Posts:
    706
    Likes Received:
    1
    Location:
    derbyshire
    Would you take on striping down/ modifying old looms for standalone Ecus or start from scratch?
     
  5. Slippywheel

    Slippywheel New Member

    Joined:
    Sep 11, 2017
    Posts:
    4
    Likes Received:
    0
    Location:
    Crawley
    Hi , i can do either and happy to assist with any projects you have . Send me an email at slippywheel@gmail.com

    Cheers
     
  6. s13silvia

    s13silvia doughnut muncher

    Joined:
    Nov 25, 2004
    Posts:
    1,566
    Likes Received:
    17
    Location:
    Highlands, Scotland
    can you supply a ~40pin deutsch connector or alternative connector for the bulkhead complete with new pins? I made a loom myself but struggling to get a good quality connector for the engine bay loom and it would be super handy.
     
  7. Slippywheel

    Slippywheel New Member

    Joined:
    Sep 11, 2017
    Posts:
    4
    Likes Received:
    0
    Location:
    Crawley
    Hi , yes I can help you find a solution , send me an email to slippywheel@gmail.com with more info please
     
  8. jon07043278

    jon07043278 Well-Known Member

    Joined:
    Jan 5, 2010
    Posts:
    1,827
    Likes Received:
    41
    Location:
    North Wales

    You can get them from CPC or RS components but not cheap.
     

Share This Page