RB25 ITB conversion NA or turbo..

Thread in 'Parts for sale' started by Tailslider, Jul 20, 2015.

  1. Tailslider

    Tailslider Member

    Joined:
    Nov 23, 2008
    Posts:
    236
    Likes Received:
    0
    Location:
    Milford on sea
    For sale I have an ITB conversion for an rb25

    It consists of a full rb26 inlet system with the adaptor plates and the neccesary VVT re-locator.

    iv attached a couple of pics, the plates are now cleaned up and ready to be sealed again on another engine, I am also including some proper Klingersil gasket material to use instead of gasket paste which cost me £50...

    I originally bought this setup of Chris bradbury on here (mr bizzle) and was used on his stroked Rb27 Stagea.

    Could be used together with a turbo setup or take the plenum off and add some trumpets on an Naturally aspirated rb25!

    I paid £800 but will take £700 for it and will chuck the gasket material in for free.

    (for anyone who thinks that is a high price, the inlets are about £3-400 and then adaptor plates from japan are £500 plus import duty and shipping, then you need to get the VVT re-locator made) so it is not a cheap bit of kit!

    pics: (turbo setup not included!)[​IMG]

    [​IMG]
     
  2. Tailslider

    Tailslider Member

    Joined:
    Nov 23, 2008
    Posts:
    236
    Likes Received:
    0
    Location:
    Milford on sea
  3. Bubski B14BBA

    Bubski B14BBA Member

    Joined:
    Jan 27, 2014
    Posts:
    62
    Likes Received:
    0
    Location:
    Christchurch Dorset
    Do you have the throttle body
     
  4. Tailslider

    Tailslider Member

    Joined:
    Nov 23, 2008
    Posts:
    236
    Likes Received:
    0
    Location:
    Milford on sea
    Bump! still available
     
  5. Smilybrad

    Smilybrad Active Member

    Joined:
    Oct 8, 2008
    Posts:
    2,226
    Likes Received:
    0
    Location:
    Middlewich Cheshire
    Could I "Hire" the adaptor plates for a week? :p
    Thanks
    Brad =)
     
  6. Boostd2

    Boostd2 Member

    Joined:
    Feb 22, 2015
    Posts:
    32
    Likes Received:
    0
    Location:
    Holland
    It's a ITB setup, meaning 6 units, so not a single Throttle Body that attaches to the inlet of the manifold.
     
  7. daniel_g

    daniel_g Member

    Joined:
    Jan 29, 2015
    Posts:
    89
    Likes Received:
    2
    Best question ever! :p
     

Share This Page