Sr20 s13 gearbox figment on an rb20det

Thread in 'Drifting Chat / Pictures / Videos' started by Moses, Mar 26, 2020.

  1. Moses

    Moses New Member

    Joined:
    Mar 25, 2020
    Posts:
    1
    Likes Received:
    0
    Location:
    Trinidad
    Hi guys I’m new to this forum.

    I have a bit of an issue with my rb20det set up.

    I reside all the way in the Caribbean where these builds are very pricey.
    A good friend of mines is giving an sr20 gearbox off his s13 setup to install on my rb20det setup what I really would like to know is if this will fit on my rb do the bolts line up on the front housing I know for sure has a difference in size etc and so does the front housing. Can anyone share some light on this.
    Much appreciated ✌️
     
  2. Aaron Allen

    Aaron Allen New Member

    Joined:
    Dec 17, 2018
    Posts:
    22
    Likes Received:
    1
    Location:
    Uk
    Hi front half of gearbox is interchangeable. I have rb20 front here if you want to swap for sr20 one. Regards Aaron
     
  3. BenRice

    BenRice Well-Known Member

    Joined:
    Apr 23, 2014
    Posts:
    1,760
    Likes Received:
    296
    Location:
    New Zealand
    I hope you have a decent shipping agent because that's a hell of a way to send a bellhousing

    Also, bellhousing swap is useless without the RB20 input shaft. SR20 one is too short iirc
     

Share This Page