SVK Customs ferrari 550 and other builds in Vietnam

Thread in 'Project Cars and Builds Threads' started by SVK Customs, Sep 12, 2010.

  1. SVK Customs

    SVK Customs Member

    Joined:
    Sep 12, 2010
    Posts:
    659
    Likes Received:
    0
    Location:
    HCMC, Vietnam
    Hello guys.

    First I'll start of with Introducing myself.

    My name is Kristian Somogyi and I run a shop in the south of Sweden since 5 years now.
    We build racing cars and body parts.

    We built this carbon fibre Skyline R33 for Swedish japcrap tuning company PBZ driven in the Scandinavian drifting series in the 2010 season by Alx Danielsson.
    We've changed all outer body panels to carbon fibre.
    So all carbon fibre parts on this car are made by us:

    [ame="http://www.youtube.com/watch?v=UymLdt8u_jw"]YouTube - Alx Danielsson drifting at Lunda, Sweden[/ame]

    Film made by Mattias Stahre.

    Some pics of the Skyline, Alx Danielsson to the left of me.

    [​IMG]

    [​IMG]

    [​IMG]

    You can see on this image that the C-pillars and rear fenders are separated behind the quarter window. So this allows the rear fenders to be exchanged.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    There is a V-pattern in the carbon fibre going over the middle of entire car from front to end just like on the cossie.

    [​IMG]


    My own projectcar is a Ferrari 550 Maranello that's also going through some lighter modifications.
    I will be competing with it in the Scandinavian drifting series. We'll of course go on a european tour with it also :)

    [​IMG]

    [​IMG]


    So if you are interested in custom made body parts in carbon, kevlar or glassfibre, or maybe you just want to duplicate your original body parts, don't be afraid to contact us!
    We can do anything when it comes to building and modifying cars and we have very good contacts with some of swedens most experienced people around us when it comes to engine tuning and chassies.
    We also build engines, rollcages and we can also help out with welding and machining.
    We sell Schmidt wheels, KW suspensions, BBS wheels, AP Racing and lots of other well known brands when it comes to racing parts.

    Sincerely

    Kristian Somogyi
     
    #1 SVK Customs, Sep 12, 2010
    Last edited: Nov 13, 2010
  2. Tang_01

    Tang_01 Member

    Joined:
    Sep 11, 2005
    Posts:
    227
    Likes Received:
    0
  3. SVK Customs

    SVK Customs Member

    Joined:
    Sep 12, 2010
    Posts:
    659
    Likes Received:
    0
    Location:
    HCMC, Vietnam
    We're currently working on another cool car for a customer which I thought that you might like to lay your eyes on. It's a Ford escort coswort and we do all the work on the body and we'll also build the completely new suspension with double triangular control arms all around, custom made billet uprights, custom made centre bolt hubs and so on. The engine is built for 600++ hp.
    Cylinder head is made by well known cosworth guru Mike Billet at RacingGreen
    Motorsport.
    There's also been purchased a factory New 200 engineblock with ”WRC” spec. And a Verdi drysump oilpump.
    Read more about the car @ http://carboncossie.com/om/transformation-to-time-attack-english/

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    #3 SVK Customs, Sep 12, 2010
    Last edited: Sep 12, 2010
  4. SVK Customs

    SVK Customs Member

    Joined:
    Sep 12, 2010
    Posts:
    659
    Likes Received:
    0
    Location:
    HCMC, Vietnam
    [​IMG]

    The car in the background is another project for a customer.
    From the beginning a MB500E W124 that's being transformed into a super touring car :)
     
  5. SVK Customs

    SVK Customs Member

    Joined:
    Sep 12, 2010
    Posts:
    659
    Likes Received:
    0
    Location:
    HCMC, Vietnam
    Here's another video of the CarbonSkyline. Lot's of talking in the beginning.
    But you must listen to Alx's discussion about raping beginning at 4.40 :D
    (rapa in swedish means barfing)
    The driving begins after the raping :)

    [ame="http://www.youtube.com/watch?v=85DZdpEFoQ4&feature=player_embedded"]YouTube - Alx & PBZ @ Action Meet - Drifting med R33 Kolfiberskyline[/ame]
     
    #5 SVK Customs, Sep 12, 2010
    Last edited: Sep 12, 2010
  6. Username

    Username Active Member

    Joined:
    Jan 1, 2007
    Posts:
    1,102
    Likes Received:
    0
    Location:
    Bath
    More of the 550M please :alschaser
     
  7. SVK Customs

    SVK Customs Member

    Joined:
    Sep 12, 2010
    Posts:
    659
    Likes Received:
    0
    Location:
    HCMC, Vietnam
    Some more pics and info of my ferrari.

    Ap Racing airjacks:

    [​IMG]

    [​IMG]

    3 piece Schmidt forged racing wheels:

    [​IMG]

    [​IMG]

    [​IMG]

    Custom made centre bolt hubs, but the original uprights will be replaced with our own uprights for better angles:

    [​IMG]

    CrMo control arms:

    [​IMG]

    [​IMG]

    [​IMG]

    I'm using a bmw V8 engine with steel cylinder liners and a supercharger instead of the original V12 engine. It's because the crank in the ferrari V12 only withstands around 600hp and a stronger one costs 12000€...

    [​IMG]

    [​IMG]

    [​IMG]

    I'll be using the original gearbox and differential to begin with:

    [​IMG]

    It's located in the rear and connected to the engine through a transaxle tube:

    [​IMG]

    I'm fabricating a new bellhousing to connect the bmw engine with the ferrari transaxle tube:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    [​IMG]

    [​IMG]

    I fabricated an axle that is fastened in the crankshaft bearing supports to hold the parts of the bellhousing in place while welding them together:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  8. SVK Customs

    SVK Customs Member

    Joined:
    Sep 12, 2010
    Posts:
    659
    Likes Received:
    0
    Location:
    HCMC, Vietnam
    AP Racing 3 disc 184mm clutch rated @ 1426Nm:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    The plugs were made of clay and then molds were cast on that.

    [​IMG]

    To get both sides completely symmetrical we use a 3D scanner on the first side and then we CNC mill the plugs for the other side from CAD drawings made out of the 3D scanning.

    [​IMG]
     
  9. SVK Customs

    SVK Customs Member

    Joined:
    Sep 12, 2010
    Posts:
    659
    Likes Received:
    0
    Location:
    HCMC, Vietnam
    I made some very simple uprights and controlarms just to be able to try out the angles before fabricating the final control arms and uprights:

    [ame=http://www.youtube.com/watch?v=bH-lrjXMW4M]YouTube - Ferrari 550 maranello GTR Drifting steering angles.[/ame]
     
  10. SVK Customs

    SVK Customs Member

    Joined:
    Sep 12, 2010
    Posts:
    659
    Likes Received:
    0
    Location:
    HCMC, Vietnam
    We're currently also working on a SR20DET engine for a S14.
    87mm bore, darton cylinder liners, HKS pistons, Eagle rods, Cometic MLS head gasket, ARP bolts, ported cylinder head and a nice little turbocharger to top it all :)

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    New turbo to the left:

    [​IMG]
     
  11. nissanr34cal

    nissanr34cal Well-Known Member

    Joined:
    Feb 28, 2010
    Posts:
    3,340
    Likes Received:
    159
    Location:
    mundford, norfolk
    omg ur ferrari is amazing
     
  12. 5hane

    5hane Member

    Joined:
    Jul 21, 2008
    Posts:
    950
    Likes Received:
    0
    Location:
    hornchurch essex
    You sir. Are a fucking lunatic :D


    AWSOME skills !!!!!!!!!!!!!!!!!!! :D
     
  13. Flymo18

    Flymo18 Member

    Joined:
    Feb 8, 2010
    Posts:
    200
    Likes Received:
    1
    Location:
    Attleborough, Norfolk
    Too much moneys :wack: sick ferrari... why do you want more than 600bhp? i would have kept the ferrari V12 :D
     
  14. SVK Customs

    SVK Customs Member

    Joined:
    Sep 12, 2010
    Posts:
    659
    Likes Received:
    0
    Location:
    HCMC, Vietnam
    Because we'll be running on 11-13" wide rear wheels.
    I want all the power I can get to be able to accelerate in the bends if necessary. You loose a lot of speed when you're running sideways with more than 55 degrees of steering angle.
    I'm aiming at around 650-700hp and around 8-900Nm which is the limit for this supercharger. It was laying in the shop anyway so I thoght I might as well use it, and then we'll see how much more we need.
    I'm going to build 180 degree headers to achieve the right hight pitched ferrari exhaust sound :)
     
    #14 SVK Customs, Sep 12, 2010
    Last edited: Sep 12, 2010
  15. HeftyDanielson

    Joined:
    Jul 28, 2010
    Posts:
    283
    Likes Received:
    0
    Location:
    Torbay Devon.
    That is sexy.....
     
  16. FlikstRR

    FlikstRR 330D powered

    Joined:
    Aug 9, 2006
    Posts:
    7,326
    Likes Received:
    0
    Location:
    Surrey, UK
    so much carbon fibre porn.. :smokin:

    unbelieveables cars.. the ferarri, the escort and skyline are all awesome.. :thumbs:
     
  17. SVK Customs

    SVK Customs Member

    Joined:
    Sep 12, 2010
    Posts:
    659
    Likes Received:
    0
    Location:
    HCMC, Vietnam
    Thanks guys :)

    I've been using my M5 engined 635 csi for drifting for lots of years now but I think it's a shame to use such a rare car for drifting, so that's why I'll use the ferrari instead and put back the interior in the csi again :)

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]



    [​IMG]
     
  18. Chan Dapman

    Chan Dapman Active Member

    Joined:
    Apr 19, 2009
    Posts:
    1,980
    Likes Received:
    0
    This is the most mental project I have ever seen.
    Bring it over to the UK next year!
     
  19. SVK Customs

    SVK Customs Member

    Joined:
    Sep 12, 2010
    Posts:
    659
    Likes Received:
    0
    Location:
    HCMC, Vietnam
    Some pics of the carbon fibre MB 500E Super touring car to be

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]



    3D scanning of molds:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    The milled polystyrene plugs with a friend posing on them :)

    [​IMG]

    Mmmm nice ass man

    [​IMG]

    It's good to have friends who can lend a hand when you only a few days before a car show where we were invited to show the ongoing project...

    [​IMG]

    [​IMG]

    Damn I'm good at painting

    [​IMG]

    fuck yeah!!!

    [​IMG]

    The entire body was sand blastered after we were finished with the rollcage.

    [​IMG]

    [​IMG]

    Some pics from the car show which is the largest in sweden. It's called Custom motorshow and it's held every eastern.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  20. SVK Customs

    SVK Customs Member

    Joined:
    Sep 12, 2010
    Posts:
    659
    Likes Received:
    0
    Location:
    HCMC, Vietnam
    I'll come over and whip its ass at some large drifting event as soon as it's finished :)
     

Share This Page