Well specd 14a

Thread in 'Drift cars for sale' started by g7gno, Jan 9, 2017.

  1. g7gno

    g7gno Member

    Joined:
    Feb 27, 2015
    Posts:
    128
    Likes Received:
    2
    Shell
    Been completely stripped all sound det has been removed all unused brakets and rear seat points have been cut out
    Full multi point weld in fabricage cage been tig welded in
    Rear boot floor been cut out and braced
    Front bumper bar
    Plumed in lifeline fire eater
    Hand held fire extinguisher
    Drivers and passengers alloy feet rests
    Battery in boot
    New front screen not to long ago

    Body
    Standard 14a kit front spliter half is missing
    +30rear over fenders
    Fiberglass front arches
    Rocket bunny rear spoiler
    Skinned bonnet with bonnet vent
    Carbon Mirror covers
    Paint is in overall good nick bare in mind it's not a show car was built to be used few marks

    Engine
    Sr20det bent cam
    Wisco pistons
    Hks step 1 cams
    Hks rocker stoppers
    Cosworth 1.2mm gasket
    Baffled big wing sump
    Splitfire coils
    Z32 maf
    Large k&n filter
    New oil pump roaters
    New Acl race main and big end bearings
    Engine was originally built by Mike Marshall at mnm engineering and has since been down to Mike agen in October for a std balanced non ground crank new oil pump roaters and new Acl race main and big end bearings,
    Engine was ran in and then for mapping in November at performance hq since dun 2 events engine was leak down tested at mapping and made 323whp and 328ftlb at 1 bar and 263whp and 274ftlb at 0.7 bar so around 400/400 at 1bar
    Has ever so slight vvt rattle nothing that has bothered me the time I have ran it I do have another vvt sprocket I can supply I purchased as a ment to be non good item,

    Turbo
    Borgworner efr 6758 on a custom 3mm wall s/s top mount manifold custom 3" down pipe for s14, this set up made 279whp at 0.7 bar and 323whp at 1 bar there is zero play on the shaft it still like new, turbo blanket as well

    Exhaust
    Custom 3" turbo back to a rear box all tiged and pie cuts not overly loud 96db if I remember

    Fuelling
    New Walbro 340 at mapping in November
    New alloy hard line under car and hoses to tank and to rail
    New d1 fpr with gauge
    New nismo 740cc injectors in November at mapping

    Gearbox
    Hks 6 speed dog box dogleg, oil catch can in engine bay, competition clutch strange 4 I think it was white bunny kit, gearbox was bought from Paul at jdm gargae was removed from his personal onevia, bought in September 16 and only dun 2 events due to engine being out of car,

    Suspension/geometry
    Hsd monopros front and rear
    Wisefab front end recent new top mounts
    driftworks rear 3 arm kit
    Extended studs on front hubs

    Brakes
    Abs deleted
    Skyline r33 front calipers on a 303mm grooved big disc set up with calipers adopters with project mu pads
    Z32 rear calipers vented calipers with project mu pads
    Carbon fiber handbrake set up on a willwood .625 cylinder works really well
    Brake bis valve
    Custom front breaded lines from speed flow
    Rear breaded lines

    Diff
    4.1 2way kazz diff with new kazz diff oil last event with spare to go with car
    Skyline 5bolt shafts

    Cooling
    Large 3row alloy rad with 2 eclectic fans
    Oil cooler and power steering cooler with spal fan
    Front mount intercooler

    Seats/harness/wheel
    drivers seat is Kevlar corbeau revaluation good condition on bride rail
    Passenger is a bride low max on custom rail
    Harness are 3" race quip camo quick lock brand new
    Outlaw suede wheel on a d1 snap off boss

    Gauges/electrics
    Hks oil press
    Hks water temp
    Hks boost gauge
    Digi oil temp gauge
    Innovate lc2 wideband with new o2 sensor
    All dash gauges works as normal
    Greddy boost controller hi and low boost
    Hard wired fuel pump relay
    Led tail lights

    Wheels
    skyline r32gtr wheels on front new 225/45/17 toyo t1r
    rota torques on rear 17x9.5 on new 235/45/17 good years eagle f1
    4 rota gtrd 18x9.5 all on good skid tyres

    spares
    Fiberglass vented front wings
    Fiberglass skirts
    4 rota 18x9.5 gtrd on tyres
    Std Sr 5spd box
    Steering rack
    2 New wisefab tie rods
    2 wisefab top mounts
    Wisefab acemen kit
    Various rose joint ends for wisefab kit
    Kazz diff oil
    5l Millers cfs
    Various other parts

    Mot till ....ill have find out

    Location
    Car is located in Fraserburgh just north of Aberdeen I can deliver it anywhere at cost

    Price 10k firm

    Serous enquirers only I will consider braking if I get enuf interest on engine box turbo shell

    Email me at g7gno@hotmail.com or call or txt 07707181568

    I will get photos to follow over next few days

    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]


    Sent from my iPad using Tapatalk
     
  2. g7gno

    g7gno Member

    Joined:
    Feb 27, 2015
    Posts:
    128
    Likes Received:
    2
    Car will be broken for parts, parts list will be in parts for sale next week


    Sent from my iPad using Tapatalk
     
  3. HWP95

    HWP95 New Member

    Joined:
    Oct 31, 2016
    Posts:
    23
    Likes Received:
    3
    How much for the box?
     
  4. g7gno

    g7gno Member

    Joined:
    Feb 27, 2015
    Posts:
    128
    Likes Received:
    2
    I have a list in the parts for sale section £3500 for box

    Sent from my E6653 using Tapatalk
     

Share This Page