, GB

PFF1-802BLK - Black Series - Pack of 2

PFF1-802BLK - Black Series - Pack of 2

Powerflex Black
Powerflex Black
Powerflex Black

Powerflex PFF1-802BLK Black Series Polyurethane bushes

Powerflex Black Series offer same quality and fit as the standard series, but in a harder compound polyurethane. Ideal for dedicated race, track and drift cars where you want it stiffer and you're not worried about it being harsher.
Powerflex offer a wide range of polybushes to fit almost every make and model of car, polybushing is an easy way of dramatically improving suspension response without sacrificing too much in the way of refinement!

Please Note: Bushes are sold in specific pack sizes. These bushes are sold in a pack size of 2 Bushes, You may require more than one pack per car. Check the fitment details below


We keep a wide range of Powerflex products in stock ready for same working day dispatch, none-stock items generally take 5-6 working days.

See fitment in Description below.
£81.48
Availability:
Dispatched 3-5 days
Worldwide Shipping Get a quote
Description

Details

These bushes fit the following Vehicle/s

Alfa Romeo 145, 146, 155 (1992-2000)
Front Lower Wishbone Rear Bush
Bushes Required:2
Packs Required:1
Notes:These bushes are designed to fit genuine control arms. If non genuine arms are fitted and you find the stainless steel sleeve not to fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 kit comes with different sized rings. Please select the correct ring depending on the rear bracket fitted.Use the smaller ring (802b) with the aluminium bracket and 802c with the pressed steel bracket.It is only possible to fit these bushes after removing the arms from the car.For arms fitted with the pressed steel rear bracket, the rubber bush may need to beburned out using a blowtorch, firstly and then the bracket cleaned thoroughly to ensure a good surface.WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM
See Diagram ref 2 Here and click Here for the product catalogue

Alfa Romeo GTV & Spider 2.0 & V6, 916 (1995-2005)
Front Lower Wishbone Rear Bush
Bushes Required:2
Packs Required:1
Notes:These bushes are designed to fit genuine control arms. If non genuine arms are fitted and you find the stainless steel sleeve not to fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 kit comes with different sized rings. Please select the correct ring depending on the rear bracket fitted.Use the smaller ring (802b) with the aluminium bracket and 802c with the pressed steel bracket.It is only possible to fit these bushes after removing the arms from the car.For arms fitted with the pressed steel rear bracket, the rubber bush may need to beburned out using a blowtorch, firstly and then the bracket cleaned thoroughly to ensure a good surface.WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM
See Diagram ref 2 Here and click Here for the product catalogue

Fiat Coupe (1993-2000), Brava, Bravo, Marea (1995-2001)
Front Lower Wishbone Rear Bush
Bushes Required:2
Packs Required:1
Notes:These bushes are designed to fit genuine control arms. If non genuine arms are fitted and you find the stainless steel sleeve not to fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 kit comes with different sized rings. Please select the correct ring depending on the rear bracket fitted.Use the smaller ring (802b) with the aluminium bracket and 802c with the pressed steel bracket.It is only possible to fit these bushes after removing the arms from the car.For arms fitted with the pressed steel rear bracket, the rubber bush may need to beburned out using a blowtorch, firstly and then the bracket cleaned thoroughly to ensure a good surface.WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM
See Diagram ref 2 Here and click Here for the product catalogue

Fiat Tipo (1988-1995)
Front Lower Wishbone Rear Bush
Bushes Required:2
Packs Required:1
Notes:These bushes are designed to fit genuine control arms. If non genuine arms are fitted and you find the stainless steel sleeve not to fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 kit comes with different sized rings. Please select the correct ring depending on the rear bracket fitted.Use the smaller ring (802b) with the aluminium bracket and 802c with the pressed steel bracket.It is only possible to fit these bushes after removing the arms from the car.For arms fitted with the pressed steel rear bracket, the rubber bush may need to beburned out using a blowtorch, firstly and then the bracket cleaned thoroughly to ensure a good surface.WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM
See Diagram ref 2 Here and click Here for the product catalogue

Lancia Delta Gen 1&2 (1983-2000), Dedra (1989-2000)
Front Lower Wishbone Rear Bush
Bushes Required:2
Packs Required:1
Notes:These bushes are designed to fit genuine control arms. If non genuine arms are fitted and you find the stainless steel sleeve not to fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. PFF1-802 kit comes with different sized rings. Please select the correct ring depending on the rear bracket fitted.Use the smaller ring (802b) with the aluminium bracket and 802c with the pressed steel bracket.It is only possible to fit these bushes after removing the arms from the car.For arms fitted with the pressed steel rear bracket, the rubber bush may need to beburned out using a blowtorch, firstly and then the bracket cleaned thoroughly to ensure a good surface.WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM
See Diagram ref 2 Here and click Here for the product catalogue

Shipping Price

Shipping Price

We ship worldwide!
  • Yes No
Finance

Finance Calculator

Reviews
Sign up for our Newsletter