Tein Suspension for TOYOTA MARK II/CHASER/CRESTA
Coilovers & Dampers

Tein Suspension for TOYOTA MARK II/CHASER/CRESTA
Coilovers & Dampers

Price as configured: £0.00

From £20.96 a month on finance (based on £732.00 Purchase) *Subject to Terms and Conditions
From £20.96 a month on finance (based on £732.00 Purchase) *Subject to Terms and Conditions
Worldwide Shipping Get a quote

Tein offer suspension systems for drivers who want a quicker and more responsive driving experience without compromising on quality. Reimagine your car’s road holding capabilities and get the performance you deserve with their range of coilovers, dampers and lowering springs.


See the range of Tein products available for your vehicle below.


We can supply the full range of Tein products. If you can't see what you're looking for please get in touch.


NOTE:All images are representative of the Tein series and may not match the product for your vehicle
  • [moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA GX100^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -116mm/Rear:15mm to -108mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:TESTED ON TURBO MODEL. NOT TESTED ON VEHICLE WITH CRUISE CONTROL.
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX100^&&details1**Series^Flex Z&&details2**Height Change:^Front:-1mm to -119mm/Rear:5mm to -112mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:TESTED ON TURBO MODEL. NOT TESTED ON VEHICLE WITH CRUISE CONTROL.
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:15mm to -102mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX91^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA LX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA SX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit]


    More Info : Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:

    Flex Z Coilovers for MARK II/CHASER/CRESTA GX100

    Series : Flex Z

    Height Change: : Front:9mm to -116mm/Rear:15mm to -108mm

    SERIES :

    Per Kit

    £732.00
    Per Kit

    Details

    • Series Flex Z
    • Height Change: Front:9mm to -116mm/Rear:15mm to -108mm
    • Allow 1-2 days for dispatch
  • [moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA GX100^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -116mm/Rear:15mm to -108mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:TESTED ON TURBO MODEL. NOT TESTED ON VEHICLE WITH CRUISE CONTROL.
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX100^&&details1**Series^Flex Z&&details2**Height Change:^Front:-1mm to -119mm/Rear:5mm to -112mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:TESTED ON TURBO MODEL. NOT TESTED ON VEHICLE WITH CRUISE CONTROL.
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:15mm to -102mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX91^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA LX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA SX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit]


    More Info : Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:TESTED ON TURBO MODEL. NOT TESTED ON VEHICLE WITH CRUISE CONTROL.

    Flex Z Coilovers for MARK II/CHASER/CRESTA JZX100

    Series : Flex Z

    Height Change: : Front:-1mm to -119mm/Rear:5mm to -112mm

    SERIES :

    Per Kit

    £732.00
    Per Kit

    Details

    • Series Flex Z
    • Height Change: Front:-1mm to -119mm/Rear:5mm to -112mm
    • Allow 1-2 days for dispatch
  • [moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA GX100^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -116mm/Rear:15mm to -108mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:TESTED ON TURBO MODEL. NOT TESTED ON VEHICLE WITH CRUISE CONTROL.
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX100^&&details1**Series^Flex Z&&details2**Height Change:^Front:-1mm to -119mm/Rear:5mm to -112mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:TESTED ON TURBO MODEL. NOT TESTED ON VEHICLE WITH CRUISE CONTROL.
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:15mm to -102mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX91^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA LX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA SX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit]


    More Info : Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:TESTED ON TURBO MODEL. NOT TESTED ON VEHICLE WITH CRUISE CONTROL.

    Flex Z Coilovers for MARK II/CHASER/CRESTA JZX90

    Series : Flex Z

    Height Change: : Front:9mm to -109mm/Rear:15mm to -102mm

    SERIES :

    Per Kit

    £732.00
    Per Kit

    Details

    • Series Flex Z
    • Height Change: Front:9mm to -109mm/Rear:15mm to -102mm
    • Allow 1-2 days for dispatch
  • [moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA GX100^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -116mm/Rear:15mm to -108mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:TESTED ON TURBO MODEL. NOT TESTED ON VEHICLE WITH CRUISE CONTROL.
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX100^&&details1**Series^Flex Z&&details2**Height Change:^Front:-1mm to -119mm/Rear:5mm to -112mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:TESTED ON TURBO MODEL. NOT TESTED ON VEHICLE WITH CRUISE CONTROL.
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:15mm to -102mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX91^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA LX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA SX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit]


    More Info : Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:

    Flex Z Coilovers for MARK II/CHASER/CRESTA JZX91

    Series : Flex Z

    Height Change: : Front:9mm to -109mm/Rear:25mm to -92mm

    SERIES :

    Per Kit

    £732.00
    Per Kit

    Details

    • Series Flex Z
    • Height Change: Front:9mm to -109mm/Rear:25mm to -92mm
    • Allow 1-2 days for dispatch
  • [moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA GX100^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -116mm/Rear:15mm to -108mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:TESTED ON TURBO MODEL. NOT TESTED ON VEHICLE WITH CRUISE CONTROL.
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX100^&&details1**Series^Flex Z&&details2**Height Change:^Front:-1mm to -119mm/Rear:5mm to -112mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:TESTED ON TURBO MODEL. NOT TESTED ON VEHICLE WITH CRUISE CONTROL.
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:15mm to -102mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX91^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA LX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA SX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit]


    More Info : Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:

    Flex Z Coilovers for MARK II/CHASER/CRESTA LX90

    Series : Flex Z

    Height Change: : Front:9mm to -109mm/Rear:25mm to -92mm

    SERIES :

    Per Kit

    £732.00
    Per Kit

    Details

    • Series Flex Z
    • Height Change: Front:9mm to -109mm/Rear:25mm to -92mm
    • Allow 1-2 days for dispatch
  • [moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA GX100^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -116mm/Rear:15mm to -108mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:TESTED ON TURBO MODEL. NOT TESTED ON VEHICLE WITH CRUISE CONTROL.
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX100^&&details1**Series^Flex Z&&details2**Height Change:^Front:-1mm to -119mm/Rear:5mm to -112mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:TESTED ON TURBO MODEL. NOT TESTED ON VEHICLE WITH CRUISE CONTROL.
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:15mm to -102mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA JZX91^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA LX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit][moreinfo**More Info^Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:
    &&subheading**Flex Z Coilovers for MARK II/CHASER/CRESTA SX90^&&details1**Series^Flex Z&&details2**Height Change:^Front:9mm to -109mm/Rear:25mm to -92mm&&detailsLink**^&&diagramref**SERIES^&&priceper**Per Kit]


    More Info : Flex Z
    Premium Street/Track Coilovers

    The Tein Flex Z maintains Tein's quality with the adoption of a sealed platform.

    By using a replacement service, it is now possible to renew old dampers to as good as new just by replacing the shock absorber units.


    Product features:

    • Steel construction
    • Damping force adjustable
    • 1-Way, 16 level damping force adjustment
    • Pillow ball upper mounts included (on selected models)
    • Twin-tube internal construction
    • Fully height adjustable
    • High performance damper oil
    • Thread-type ride height adjustment via spring seat
    • Rich Tein green powder coated damper body with 2 layers of anti-rust paint
    • ZT coating on shell case (tougher protection against chipping and rust)
    • Compatible with EDFC (Electronic Damping Force Controller) to allow for in-car damping force adjustment
    • Replacement damper program (complete rebuild not available)


    Note: All images are generic images of the product range and may not match the product being purchased.



    NOTES:

    Flex Z Coilovers for MARK II/CHASER/CRESTA SX90

    Series : Flex Z

    Height Change: : Front:9mm to -109mm/Rear:25mm to -92mm

    SERIES :

    Per Kit

    £732.00
    Per Kit

    Details

    • Series Flex Z
    • Height Change: Front:9mm to -109mm/Rear:25mm to -92mm
    • Allow 1-2 days for dispatch

Let us know the Make, Model (Inc Engine), Year and any modifications that may effect fitment.

* Required

Shipping Price

Shipping Price

We ship worldwide!
  • Yes No
Finance

Finance Calculator

Reviews

No Reviews

Get the latest product releases & offers...
Top